2. UPDATE FIRMWARE
(1) Connect the update terminal of AV receiver with the "WRITING KIT".
(2) Set the switch of "WRITING KIT". (Refer to the table below.)
DSPBOOT
H
(3) Press the X button to turn the power on of AV receiver.
(4) Set the switch of "WRITING KIT". (Refer to the table below.)
DSPBOOT
H
(5) Press the "RESET" switch of "WRITING KIT".
(6) Run the "STMicroelectronics flash loader.exe" on program file.
(7) Click the "Next" button 3 times.
Click the "Next" button for 1st time.
CE
EPM
H
L
CE
EPM
H
H
23
CNVSS
H
CNVSS
H
Need help?
Do you have a question about the AVR-1513 and is the answer not in the manual?
Questions and answers