Delete Program Watering Start Time(S) - Rain Bird ISM Instruction Manual

Delete Program Watering Start Time(s)

1. If you want to delete an unwanted
watering start time from a program, turn
the Programming Dial to SET WATERING
START TIME(S).
2. Press Enter to select the start time number
(1, 2, 3 or 4) you want to delete.
NOTE: Watering start times appear in
chronological order. The earliest
watering start time is number 1, the
next later watering start time is
number 2, and so on. If you delete a
watering start time, all later start
times are automatically advanced by
one watering start time number. This
re-numbering only occurs after you
move the Programming Dial from the
SET WATERING START TIME(S) position
to another function.
3. The watering start time number to be
deleted appears in the display.
4. Press the (+) or (-) buttons until the blank
position (four dashes, "--.--") appears in
Page 24
the display.
5. Turn the Programming Dial back to the
SYSTEM ON position. The unwanted
watering start time is now deleted.
ISM Installation, Programming & Operation Guide