Model 402KL ® Thank you for your purchase of this Health o meter Professional product. Please read this manual carefully, and keep it for easy reference or training. TABLE OF CONTENTS Caution and Warning....................3 Specifications for This Scale ..................3 Certifications / Disposal / Service ................4 Assembly Instructions 402KL Scale .................5...
SPECIFICATIONS FOR THIS SCALE General The Model 402KL physician beam scale employs a proven and rugged mechanical design to measure patient weight and height. Each precision scale is designed to provide accurate, reliable, and repeatable weight measurements. In addition, each scale is designed to provide the user with features that make the weighing process simple, fast, and convenient.
CUSTOMER SERVICE INFORMATION The 402KL physician beam scale is shipped disassembled in one carton. Carefully inspect the carton for shipping damage before unpacking. If damage is found, contact Customer Service.
402KL ASSEMBLY INSTRUCTIONS Before Assembly Each 402KL physician beam scale is shipped disassembled in one carton. Carefully inspect the carton for shipping damage before unpacking. If damage is found, contact your shipper or a ® Health o meter Professional representative immediately. Claims must be filed with the shipper as soon as possible after receipt of the package.
Page 6
1. Carefully remove the scale platform and pillar from the carton. Place the scale platform and pillar on a flat, level, and dry surface. Using a table can be helpful for assembly of 402KL scale (see Figures 1 & 5).
TRANSPORTATION Preparing a 402KL Scale for Transportation (see Figures 7-10) This scale can be easily assembled with a wheel bracket (Part Number 55000) for storage, or for transport from one room to another. This scale does not include 55000 Wheel Bracket, and must be acquired separately.
OPERATING INSTRUCTIONS Zero Balance Adjustment (see Figures 11 - 13) The scale should be checked periodically, particularly when moved, by following the instructions below: Note: A flat head screwdriver is required. 1. Ensure that the scale is located on a hard, flat, and level surface. Step on and off scale several times in order to align all internal parts.
COUNTERWEIGHT INSTRUCTIONS Counterweight Instruction (see Figures 14 - 20) In order to increase the scale’s capacity to a maximum value of 490 lb / 210 kg, the counterweight set (55090) must be acquired. The scale can be easily assembled with a counterweight set (Part Number 55090 for whole set, 55080 for counterweight in pounds, and 55085 for counterweight in kilograms).
Page 17
COUNTERWEIGHT INSTRUCTIONS (CONT) Counterweight Instructions for Weighing in Kilograms (kg) Note: The 30 kg counterweight is required when weighing a patient who is over 170 kg. Counterweight Instructions for Weighing a Patient 171 - 190 (kg) 1. When a patient weighs between 171 - 190 kg, place the lower poise weight at 140 kg. 2.
Page 18
COUNTERWEIGHT INSTRUCTIONS (CONT) Counterweight Set (55090) Figure 14 Notch from the left Figure 15...
HEIGHT MEASUREMENT INSTRUCTIONS Height Measurements (Refer to figures 21-27) Note: A patient needs to be a minimum of 23-5/8” (600mm) in height for the height to be accurately measured. 1. Raise the headpiece above the patient’s head. 2. Position the patient against the height rod. 3.
Page 22
HEIGHT MEASUREMENT INSTRUCTIONS Height Rod Below ” Height Rod Extended Above ” Indicator Inches read: 69” + Cm read: 105 cm + Cm read: 176 cm + Inches read: 41” + 3/8” = 69 3/8” 0.2 cm = 176.2 cm 0.2 cm = 105.2 cm 3/8”...
The accuracy of the 402KL scale when calibrated at the factory is within +/- 0.1kg or ¼ pound. For the most accurate weight measurement, use the scale on a hard level surface and stand in the center of the platform.
MAINTENANCE The following provide instructions for maintenance and cleaning for the 402KL. Maintenance operations other than those described in this manual should be performed by qualified service personnel. MAINTENANCE Before first use and after periods of non-use, check the scale for proper operation and function.
Need help?
Do you have a question about the 402KL and is the answer not in the manual?
Questions and answers