Skipping Program Cycles; Program Stop; Program End With Water In The Drum - Miele PW 6321 Operating And Installation Instructions

Use

Skipping program cycles

Cycles of a program in progress can be
skipped or repeated.
^ Press the f "End" button to stop the
program.
1 Hot Wash

Program stop

ü
i
^ Press the ü "Skip/Repeat" button. The
display shows the current area, block or
step.
See also "Program structure" in the
Programming Manual.
Skip/Repeat -> 1 Hot Wash
Program stop
Area 2: Main wash
Area 2: Main wash
Block 1: Main wash
Step Wash time 2
^ Turn the jog shuttle to "Area" and press it to
confirm the selection.
Area: Select either 1 Prewash, 2 Main
wash or 3 Rinse and confirm by pressing
the jog shuttle.
^ Turn the jog shuttle to "Block" and press it
to confirm the selection.
Block: Select either Prewash 1-10, Main
wash 1-10 or Rinse 1-10 and confirm by
pressing the jog shuttle.
^ Turn the jog shuttle to "Block" and press it
to confirm the selection. Select the desired
program step and confirm.
^ To start the new program step press S
"Save" and h "Start".
To go back without skipping a program
cycle
^ Press the A "Back" button to go back to
the program stop.
18
Program stop
^ To stop the program, press f "End".
The program stops.
1
Program stop
f ^ Press f "End" again to continue the
program.

Program end with water in the drum

If the program is interrupted during a cycle,
the display shows either:
1
Program end - Water in the drum
e
A
S
or
1
-
A
Program end - Drum rotates
S
,
Do not use force!
^ Press the q "Drain" button or select the
Drain Extra program and press h "Start".
^ At the end of the program open the door.
Hot Wash
ü
i
Hot Wash
m
Hot Wash
m
The drum door is locked.
f
FC A
FC A