Oil Seal Removal/Installation; Ring Gear Bearing Retainer - Honda GoldWing GL1100 Service Manual

gear and and
nr,,·ln~lrl
is correct,
11-14).
Difference
of
Measurement
Service limit: 0.10 mm (0.004
If backlash is excessive, check the
11·11,11-1
ass;errlbly must be re!=llac:ed
Remove the tool and dial indicator. Turn
the gear and measure backlash. this
prclcedUire once more. the difference of the three
measurements.
Oil Seal Removal/Installation
NOTE:
ail final gear case oil seals and
whenever the case is disassembled.
Gear Bearing Retainer
Remove the final gear case aSI.ernblly from the mCltolrcvcle
11
Remove the distance collar.
lock washer tabs and remove
Remove the
wrench,
Remove the
gear be,nirlg retainer with the retainer
(confd)
11-5