Trunk Compartment Operation - Maserati Ghibli Owner's Manual

Hide thumbs Also See for Ghibli:
Table of Contents

Advertisement

Before Starting
• Within 15 seconds, press the "Rear
Sunshade" soft-key to raise the
power sunshade.
• Within 15 seconds, press the "Rear
Sunshade" soft-key a second time to
2
lower the sunshade.
If the sunshade is in the raised position
and the gear lever is positioned in R
(Reverse), the sunshade will
automatically fully lower.
When the gear lever is shifted out of R
(Reverse) the sunshade will
automatically return to the fully raised
position after approximately five
seconds.
On versions equipped with heated rear
seats is available the trigger button of
the rear sunshade, positioned at the
rear of the central console, which can
be operated by the rear passengers.
46
• Press the button to raise the
sunshade.
• Press the button a second time to
lower the sunshade.
Trunk Compartment
Operation
The trunk lid can be released from
inside the vehicle by pressing the
release button on the door trim panel.
NOTE:
The shift lever must be in P (Park)
before the button can operate.
The trunk lid can be released from
outside the vehicle by pressing the
button on the key fob with RKE
transmitter twice within five seconds
or by using the external release button
located on the lower side of the trunk
ledge, between the license plate lights,
when the vehicle has been unlocked
using the key fob or the Passive Entry
system.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ghibli and is the answer not in the manual?

Questions and answers

Urs Jann
April 6, 2025

How do I change the battery of the key?

1 comments:
Mr. Anderson
April 6, 2025

To change the battery in a Maserati Ghibli key:

1. Remove the key from the fob by pressing the release button.
2. Use a T6 Torx screwdriver to remove the screw at the top of the fob.
3. Carefully pry off the two side aluminum covers using a flat screwdriver.
4. Remove the circuit board by taking out the second screw (also T6).
5. Replace the battery under the circuit board with a CR2032 battery.
6. Reassemble the key fob by reversing the steps.

This answer is automatically generated

Table of Contents

Save PDF