Mitsubishi Electric MFZ-KJ25VE Service Manual page 33

Hide thumbs Also See for MFZ-KJ25VE:
Table of Contents

Advertisement

OPERATING PROCEDURE
4. Removing the nozzle assembly
(1) Remove the panel. (Refer to 1.)
(2) Rotate the display receiver P.C. board holder to the
right side and disconnect the vane motor relay con-
nector. (Photo 6)
(3) Remove the fixed screws on the both sides of the
nozzle.
(4) Disengage the catches on the nozzle from the box.
(5) Hold the both sides of the nozzle. Rotate the nozzle
toward you around the right and left ribs to remove it.
5. Removing the horizontal vane motor
(1) Remove the panel. (Refer to 1.)
(2) Remove the screws of the horizontal vane motor sup-
port and pull out the horizontal vane motor support
from the nozzle.
(3) Remove the screws of the horizontal vane motors.
(4) Remove the horizontal vane motors from the horizon-
tal vane motor support.
(5) Disconnect the connectors from the horizontal vane
motor.
Installing the horizontal vane motor
Connect the connectors to the horizontal vane motors
by referring to the colors, red and white, noted on the
vane motor support.
6. Removing the multi-flow vane motor unit
(1) Remove the panel. (Refer to 1.)
(2) Disconnect the connector from the multi-flow vane
motor unit.
(3) Remove the screws of the multi-flow vane motor unit
and pull out the multi-flow vane motor unit from the
nozzle.
OBH666A
Photo 9
Screws of the nozzle
Photo 10
Catch
Photo 11
Screws of the horizontal
vane motors
Photo 12
Screws of the multi-flow vane motor unit
33
PHOTOS
Water cover
Catch
Screws of the horizontal
vane motor support
Rib
Rib
Catches

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfz-kj35veMfz-kj50ve

Table of Contents