Reset - Yamaha PSR-S670 Reference Manual

RESET

This function lets you restore the status of the instrument to the original factory settings.
1
Use the [1 ]–[4 ] buttons to select the desired item then use the [5 ]/
[6 ] buttons to enter or remove the checkmark.
When an item is checkmarked, the corresponding parameters will be reset as described below:
SYSTEM SETUP
MIDI SETUP
USER EFFECT
MUSIC FINDER
FILES & FOLDERS
REGIST
10
2
Press one of the [7 ]/[8 ] (FACTORY RESET EXECUTE) buttons to carry out the
Factory Reset operation for all checkmarked items.
96
PSR-S670 Reference Manual
Resets the System Setup parameters to the original factory settings. Refer to
the "Parameter Chart" in the Data List on the website for details about which
parameters belong to System Setup.
Resets the MIDI settings including the MIDI Setups on the USER tab display
to the original factory status.
Resets the current Effect settings and the following data:
• User Effect types .........................................................................
• User Master EQ types ................................................................
• User Master Compressor types ...................................................
Resets the Music Finder data (all Records) to the original factory settings.
Deletes all files and folders including the Expansion folder stored in the USER
tab display.
Turns off all the Registration Memory [1]–[8] lamps, indicating that no Regis-
tration Memory Bank is selected although all the Registration Memory Bank
files are maintained. In this status, you can create Registration Memory setups
from the current panel settings.
The same operation can be done by turning the power on while holding the B5 key (rightmost B key). In this
NOTE
case, you can create Registration Memory setups from the default panel settings.
2
page 74
page 75
page 76