Table of Contents
Advertisement
Taking a test
3
Disposing of the used lancet and test strip
Discard the used lancet carefully after each use to avoid
unintended lancet stick injuries. Used lancets and test
strips may be considered biohazardous waste in your
area. Be sure to follow your healthcare professional's
recommendations or local regulations for proper disposal.
Wash hands thoroughly with soap and water after
handling the meter, test strips, lancing device and cap.
Testing with control solution
Control solution testing precautions
OneTouch Verio® Control Solution is used to check that the
meter and test strips are working together properly and
that the test is performing correctly. (Control solution is
available separately.)
NOTE:
• Use only OneTouch Verio® Control Solution with your
OneTouch Verio Flex™ Meter.
• When you first open a new vial of control solution,
record the discard date on the vial label. Refer to the
control solution insert or vial label for instructions on
determining the discard date.
58
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Vario Flex and is the answer not in the manual?
Questions and answers
I apply my sample but the meter only shows the flashing blood dot. It does not count down. I haven't been able to get a reading.
The OneTouch Verio Flex meter only shows a flashing blood dot and does not count down after applying a sample due to one of the following reasons:
- Not enough blood or control solution was applied, or more was added after the meter began to count down.
- The test strip may be damaged or moved during testing.
- The sample was improperly applied.
- There may be a problem with the meter.
To resolve this issue, repeat the test with a new test strip. If the error message appears again, contact OneTouch® Customer Care.
This answer is automatically generated
How to clear old data from my one touch Verio Flex machine