OneTouch Verio Flex Quick Start Manual

Quick Start Guide
OneTouch Verio Flex™ Blood Glucose

Monitoring System

Use this guide to get to know your meter, and follow the steps
inside to get started.
IMPORTANT: Please read the Owner's Booklet that came
with your system.
AW 06933301B
1
Set the time and date on your meter
Turn it on
Press and hold until the
start-up screen appears.
Use buttons to edit each
setting and press to confirm.
Set the time on the first SET screen
> Hour flashes. Press if correct
or edit and confirm.
> Minutes flash. Press
if correct
or edit and confirm.
Set the date on the next SET screen
> Year flashes. Press if correct
or edit and confirm.
> Month flashes. Press if
correct or edit and confirm.
> Day flashes. Press if correct
or edit and confirm.
Ready to test
Your meter setup is complete when
the screen with 3 dashes appears.
2
Take a test
Flashing blood drop
appears.
Insert a test strip (gold side and
2 silver prongs facing you) to
turn the meter on.
Apply blood sample to the The channel turns red and
channel on either side of the meter counts down
the test strip. Wait for the from 5 to 1.
channel to fill.