Motorola MVME712-12 User Manual
  1. Manuals
  2. Brands
  3. Motorola Manuals
  4. Computer Hardware
  5. MVME712-12
  6. User manual

Motorola MVME712-12 User Manual

Transition modules and lcp2 adapter board
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MVME712-12, MVME712-13,
MVME712A, MVME712AM,
and MVME712B
Transition Modules
and LCP2 Adapter Board
User's Manual
(MVME712A/D3)

Advertisement

Table of Contents
loading

Related Manuals for Motorola MVME712-12

Summary of Contents for Motorola MVME712-12

  • Page 1 MVME712-12, MVME712-13, MVME712A, MVME712AM, and MVME712B Transition Modules and LCP2 Adapter Board User’s Manual (MVME712A/D3)
  • Page 2 Motorola reserves the right to revise this document and to make changes from time to time in the content hereof without obligation of Motorola to notify any person of such revision or changes.

  • Page 3: Related Documentation

    MVME712-13 The manual also provides information about the LCP2 Adapter Board. The transition modules are used as the interface between Motorola Single Board Computer VMEmodule families, such as the MVME147S, MVME162, MVME167, MVME187, and MVME197, and their peripheral devices. An LCP2 adapter module and a cable are supplied for interconnection between the MVME712 family module and the MVME1xx family module.
  • Page 4 Although not shown in the above list, each Motorola Computer Group manual publication number is suffixed with characters which represent the revision level of the document, such as "/D2" (the second revision of a manual); a supplement bears the same number as the manual but has a suffix such as "/D1A1"...
  • Page 5 ¨ Motorola and the Motorola symbol are registered trademarks of Motorola, Inc. VMEmodule is a trademark of Motorola, Inc. All other products mentioned in this document are trademarks or registered trademarks of their respective holders. © Copyright Motorola 1989, 1993, 1994...
  • Page 6 Inc. assumes no liability for the customer's failure to comply with these requirements. The safety precautions listed below represent warnings of certain dangers of which Motorola is aware. You, as the user of the product, should follow these warnings and all other safety precautions necessary for the safe operation of the equipment in your operating environment.
  • Page 7 Dangerous voltages, capable of causing death, are present in this equipment. Use extreme caution when handling, WARNING testing, and adjusting. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in WARNING accordance with the documentation for this product, may cause interference to radio communications.

  • Page 9: Table Of Contents

    Introduction 1-1 Features of the MVME712 Family Modules 1-1 Features of the LCP2 Adapter Board 1-2 SpeciÞcations 1-2 Cooling Requirements 1-3 FCC Compliance 1-3 General Description 1-4 Introduction 2-1 Unpacking Instructions 2-1 MVME712x Module Preparation 2-1 DSR Line Pull Up Select Headers (J8, J9, J13, J14) 2-6 Serial Port 2/Modem Port 2 Select (J16, J17) 2-7 Serial Port Configuration 2-7 Modem Port Configuration 2-7...
  • Page 10 Parts Lists and Locations 3-22 Schematic Drawings 3-32 General Description A-1 Modem Features A-2 Technical SpeciÞcations A-3...
  • Page 11 Internal SCSI and Serial Port Connections 2-13 Internal SCSI and Modem Connections 2-15 MVME712B External SCSI Connections 2-17 MVME712-12 Parts Location Drawing (Primary Side) 3-24 MVME712-13 Parts Location Drawing (Primary Side) 3-25 MVME712A Parts Location Drawing (Primary Side) 3-26 MVME712AM Parts Location Drawing (Primary Side) 3-27...

  • Page 12: Introduction

    Small Computer Systems Interface (SCSI) shielded connector bus interface (through the LCP2 adapter) for connection to external devices (MVME712B) MVME712A/D31-1 Modules Referred To all of the MVME712 modules, including the MVME712B all MVME712 modules other than the MVME712B MVME712-12 MVME712-13 MVME712A MVME712AM MVME712B MVME712-12 MVME712-13 MVME712A MVME712AM...

  • Page 13: Features Of The Lcp2 Adapter Board

    Operating temperature Storage temperature Relative humidity Physical characteristics (excluding front panel and MVME712B) MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual SpeciÞcations + 5 Vdc, 281 mA maximum (255 mA typical) +12 Vdc - 12 Vdc Serial Four multiprotocol (connected through the...

  • Page 14: Cooling Requirements

    Cooling Requirements Motorola VMEmodules are specified, designed, and tested to operate reliably with an incoming air temperature range from 0 degrees C to 55 degrees C (32 degrees F to 131 degrees F) with forced air cooling. Temperature qualification is performed in a standard Motorola VMEsystem 1000 chassis. Twenty-five watt load boards are inserted in the two card slots, one on each side, adjacent to the board under test to simulate a high power density system configuration.

  • Page 15: General Description

    Telco modular jack on the front panel. The serial ports are configured for use as to modem and cannot be changed without null modem cables. MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual...

  • Page 16: Introduction

    HARDWARE PREPARATION Introduction This chapter provides unpacking instructions, hardware preparation, and installation instructions for the MVME712 family modules and the LCP2 adapter. Unpacking Instructions If the carton is damaged upon receipt, request that carrier's agent be present during unpacking and inspection of equipment.

  • Page 17: Mvme712-12 Header Locations

    Hardware Preparation and Installation MVME 712A/AM Figure 2-1. MVME712-12 Header Locations MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual...

  • Page 18: Mvme712-13 Header Locations

    MVME 712A/12/13 Figure 2-2. MVME712-13 Header Locations MVME712A/D3 MVME712x Module Preparation...

  • Page 19: Mvme712A Header Locations

    Hardware Preparation and Installation MVME 712A/AM Figure 2-3. MVME712A Header Locations MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual...

  • Page 20: Mvme712Am Header Locations

    MVME 712A/12/13 Figure 2-4. MVME712AM Header Locations MVME712A/D3 MVME712x Module Preparation...

  • Page 21: Dsr Line Pull Up Select Headers (J8, J9, J13, J14)

    (J1, J3, J4, J5) to a high (+12 Vdc) level when terminals are connected and DSR is to be used as a constantly activated output from the MVME712x. The as-shipped configuration is shown below. MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual...

  • Page 22: Serial Port 2/Modem Port 2 Select (J16, J17)

    Only one port function may be selected at any one time. Otherwise, improper operation will result. Serial Port Configuration The MVME712-12 and MVME712A are shipped with port 2 configured for connection as a serial port as shown below. SERIAL PORT 2 Modem Port Configuration...

  • Page 23: Scsi Termination

    (R1, R2, R3) for terminating the SCSI lines using three 8-pin SIP resistors. Refer to the Installation Instructions for use of the terminators. MVME712B Module Preparation No preparation of the MVME712B is necessary. The location of the connectors is illustrated in MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual Figure 2-5...

  • Page 24: Mvme712B Connector Locations

    MVME712B Module Preparation MVME 712B cb208 9212 Figure 2-5. MVME712B Connector Locations MVME712A/D3...

  • Page 25: Lcp2 Adapter Board Preparation

    SCSI. The location of the resistors, fuse, and connectors is illustrated in use of the terminators. Figure 2-6. LCP2 Adapter Connector Locations 2-10 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual Figure 2-6 . Refer to the Installation Instructions for cb206 9212...

  • Page 26: Installation Instructions

    Installation Instructions The basic procedure for installation of the family of MVME712 modules and the LCP2 adapter is as follows: Turn all equipment power OFF and disconnect the power cable from the AC power source. Connecting modules while the power is applied may result aution in damage to components on the module.
  • Page 27 Verify that terminators are installed on the last SCSI device on the cable. If they are not present, install terminators. MVME712-12 and MVME712-13: Attach the cable supplied with the MVME712x module from LCP2 adapter connector J2 to connector P2 on the MVME712x module.

  • Page 28: Internal Scsi And Serial Port Connections

    Check the fuse on the LCP2 adapter module and replace it, if necessary. The fuse on the LCP2 adapter module is for SCSI terminator power. The fuse on the MVME1xx VMEmodule is for Ethernet transceiver power. The resistance of each fuse should be less than 1 Ohm. MVME712X TERMINATOR P2 OR J11...
  • Page 29 Connect a user-supplied Telco modular cable to the Telco modular jack on the front panel. Connect the power cable to the AC power source and turn on the unit. 2-14 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual Figure 2-8 Figure 2-8 Figure 2-8...

  • Page 30: Internal Scsi And Modem Connections

    MVME712-13 MVME712AM MODEM TELCO JACK Figure 2-8. Internal SCSI and Modem Connections MVME712A/D3 TERMINATOR SCSI DEVICE LC P2 ADAPTER P2 OR J11 ENCLOSURE BOUNDARY Installation Instructions MVME167 cb225 9408 (2-2) 2-15...
  • Page 31 P2 connector on the MVME1xx VMEmodule. Be sure to orient pin 1 of the adapter with pin 1 of the backplane connector. MVME712-12 and MVME712-13: Attach the cable supplied with the MVME712x module from LCP2 adapter connector J2 to connector P2 on the MVME712x module.

  • Page 32: Mvme712B External Scsi Connections

    Check the fuse on the LCP2 adapter module and replace, if necessary. The fuse on the LCP2 adapter module is for SCSI terminator power. The fuse on the MVME1xx VMEmodule is for Ethernet transceiver power. The resistance of each fuse should be less than 1 Ohm. MVME712B MVME712X ENCLOSURE BOUNDARY...
  • Page 33 Hardware Preparation and Installation 2-18 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual...

  • Page 34: Introduction

    MVME712 modules. Jumper J1 and J3-J5 MVME712A/D33-1 SUPPORT INFORMATION J11 on the MVME712A J11 on the MVME712AM P2 on the MVME712-12 P2 on the MVME712-13 backplane at the MVME1xx VMEmodule P2 connector Table 3-2. MVME712 Jumpers Description 9-pin EIA-232D serial por...

  • Page 35: Connector P2 Interconnect Signals (Lcp2 Adapter)

    Table 3-3 listed in Table 3-3. Connectors J1, J3-J5 Interconnect Signals (MVME712 x ) Number MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual Signal Signal Name and Description Mnemonic DATA CARRIER DETECT - Sent by the modem to the terminal to indicate that a valid carrier is being received.
  • Page 36 Table 3-3. Connectors J1, J3-J5 Interconnect Signals (MVME712 x ) (Continued) Signal Number Mnemonic MVME712A/D3 Interconnect Signals Signal Name and Description REQUEST TO SEND - RTS is supplied by the terminal to the modem when it is required to transmit a message. With RTS off, the modem carrier remains off.

  • Page 37: Connector J2 Interconnect Signals (Lcp2 Adapter)

    Connector J2 on the LCP2 adapter is a 64-pin connector. Each pin connection, signal mnemonic, and signal characteristic for the connector is listed in Table 3-4. Connector J2 Interconnect Signals (LCP2 Adapter) Number MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual Signal Signal Name and Description Mnemonic...
  • Page 38 Table 3-4. Connector J2 Interconnect Signals (LCP2 Adapter) (Continued) Signal Number Mnemonic PRACK* PRPE PRBSY INPRIME* PRSEL PRFAULT* TXD3 RXD3 CTS3 RTS3 DCD3 MVME712A/D3 Interconnect Signals Signal Name and Description DATA ACKNOWLEDGE (Printer) - a low level input pulse indicating that the next character may be sent.
  • Page 39 Support Information Table 3-4. Connector J2 Interconnect Signals (LCP2 Adapter) (Continued) Number 40,41 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual Signal Signal Name and Description Mnemonic DTR3 DATA TERMINAL READY (serial port 3) - a signal from the terminal to the modem indicating that the terminal is ready to send or receive data.
  • Page 40 Table 3-4. Connector J2 Interconnect Signals (LCP2 Adapter) (Continued) Signal Number Mnemonic RTS4 TRXC4 DTR4 CTS4 DCD4 RTXC4 TXD2 RXD2 MVME712A/D3 Interconnect Signals Signal Name and Description REQUEST TO SEND (serial port 4) - RTS is supplied by the terminal to the modem when it is required to transmit a message.
  • Page 41 Support Information Table 3-4. Connector J2 Interconnect Signals (LCP2 Adapter) (Continued) Number MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual Signal Signal Name and Description Mnemonic CTS2 CLEAR TO SEND (serial port 2) - CTS is a function supplied to the terminal by the modem, and indicates that it is permissible to begin transmission of a message.

  • Page 42: Connector J2 Interconnect Signals (Mvme712-13, Mvme712Am)

    Connector J2 Interconnect Signals (MVME712-13, MVME712AM) Connector J2 is a backplane modem power connector. Each pin connection, signal mnemonic, and signal characteristic for the connector is listed in Table 3-5. Connector J2 Interconnect Signals (MVME712-13/AM) Signal Number Mnemonic +5VMODEM +12VMODEM -12VMODEM Connector J3 Interconnect Signals (LCP2 Adapter) Connector: Connector J3 on the LCP2 adapter is the SCSI port.
  • Page 43 Support Information Table 3-6. Connector J3 Interconnect Signals (LCP2 Adapter) (Continued) Number 19-24 27-31 33-35 3-10 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual Signal Signal Name and Description Mnemonic DB04* DATA bus (bit 4) GROUND DB05* DATA bus (bit 5)

  • Page 44: Connector Scsi Interface Interconnect Signals (Mvme712B)

    Table 3-6. Connector J3 Interconnect Signals (LCP2 Adapter) (Continued) Signal Number Mnemonic D/C* REQ* O/I* Connector SCSI INTERFACE Interconnect Signals (MVME712B) Each pin connection, signal mnemonic, and signal characteristic for the Table 3-7 connector is listed in Table 3-7. SCSI INTERFACE Interconnect Signals (MVME712B) Signal Number Mnemonic...
  • Page 45 Support Information Table 3-7. SCSI INTERFACE Interconnect Signals (MVME712B) (Continued) Number 35-37 39,40 3-12 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual Signal Signal Name and Description Mnemonic DB07* DATA bus (bit 7) - most signiÞcant bit and the highest priority during the arbitration phase.

  • Page 46: Connector Ethernet Interconnect Signals (Mvme712B)

    Connector ETHERNET Interconnect Signals (MVME712B) Each pin connection, signal mnemonic, and signal characteristic for the Table 3-8 connector is listed in Table 3-8. ETHERNET Interconnect Signals (MVME712B) Signal Number Mnemonic +12VF 14,15 MVME712A/D3 Interconnect Signals Signal Name and Description Not used. COLLISION + (Input) - a signal to indicate that multiple stations are contending for access to the transmission medium.

  • Page 47: Connector J6 Interconnect Signals (Mvme712-13, Mvme712Am)

    Each pin connection, signal mnemonic, and signal characteristic for the connector is listed in Table 3-10. Connector J7 Interconnect Signals (MVME712-13/AM) Number 3-14 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual Signal Signal Name and Description Mnemonic Tip side of telephone line.

  • Page 48: Connector J10 Interconnect Signals (Mvme712X)

    Connector J10 Interconnect Signals (MVME712 x ) Connector J10 is the Ethernet interconnect on the MVME712x (MVME712A, MVME712AM, MVME712-12, and MVME712-13). Each pin connection, signal mnemonic, and signal characteristic for the connector is listed in Table 3-11. Connector J10 Interconnect Signals (MVME712 x )

  • Page 49: Connector P2 And J11 Interconnect Signals (Mvme712X)

    11-20 Connector P2 and J11 Interconnect Signals (MVME712 x ) Connector P2 on the MVME712-12 or MVME712-13, or connector J11 on the MVME712A or MVME712AM, receives the signals from the LCP2 adapter. Each pin connection, signal mnemonic, and signal characteristic for the connectors is listed in Table 3-12.
  • Page 50 Table 3-12. Connector P2, J11 Interconnect Signals (MVME712 x ) (Continued) Pin Number Signal Mnemonic PRD02 PRD01 PRD04 PRD03 PRD06 PRD05 PRD07 PRACK* PRPE PRBSY INPRIME* PRSEL PRFAULT* FAULT (Printer) - an input signal that indicates a TXD3 RXD3 CTS3 MVME712A/D3 Interconnect Signals Signal Name and Description...
  • Page 51 Table 3-12. Connector P2, J11 Interconnect Signals (MVME712 x ) (Continued) Pin Number A20,C21 40,41 3-18 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual Signal Signal Name and Description Mnemonic RTS3 REQUEST TO SEND (serial port 3) - RTS is supplied by the terminal to the modem when it is required to transmit a message.
  • Page 52 Table 3-12. Connector P2, J11 Interconnect Signals (MVME712 x ) (Continued) Pin Number Signal Mnemonic RXD4 RTS4 DTR4 CTS4 DCD4 TXD2 RXD2 MVME712A/D3 Interconnect Signals Signal Name and Description RECEIVE DATA (serial port 4) - data that is demodulated from the receive line is presented to the terminal by the modem.

  • Page 53: Connector J12 Interconnect Signals (Mvme712-13, Mvme712Am)

    MVME712AM. Each pin connection, signal mnemonic, and signal characteristic for the connector is listed in Table 3-13. Connector J12 Interconnect Signals (MVME712-13/12AM) Number 3-20 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual Signal Signal Name and Description Mnemonic CTS2...

  • Page 54: Connector J15 Interconnect Signals (Mvme712X)

    Connector J15 Interconnect Signals (MVME712 x ) Connector J15 is the printer port on the MVME712x (MVME712-12, MVME712-13, MVME712A, and MVME712AM). Each pin connection, signal mnemonic, and signal characteristic for the connector is listed in Table 3-14. Connector J15 Interconnect Signals (MVME712 x )

  • Page 55: Parts Lists And Locations

    J1,J3-J5 29NW9802H73 28NW9802J57 28NW9802H56 28NW9802H49 J8,J9,J13,J14 29NW9805C07 J16,J17 3-22 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual Parts List Parts Location Drawing Primary side - Primary side - Primary side - Primary side - Table 3-15 Secondary side -...
  • Page 56 Resistor, SMD, 2.2K ohm, 5%, 1/4 W Resistor, SMD, 2.2K ohm, 5%, 1/4 W (MVME712A, MVME712AM) I.C. MC145406P, 16 pin Jumper, shorting, insulated (use at J8, J9, J13, J14, J16, J17) Front panel (MVME712-12, MVME712-13) Front panel (MVME712A, MVME712AM) 3-23...
  • Page 57 Support Information Table 3-15. MVME712 x Module Parts List (Continued) Reference Motorola Description Designation Part Number 01-W2368C01A Modem kit (MVME712-13 and MVME712AM) 3-24 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual...
  • Page 58 MVME 712A/AM Figure 3-1. MVME712-12 Parts Location Drawing (Primary Side) MVME712A/D3 Parts Lists and Locations 3-25...

  • Page 59: Support Information

    Support Information MVME 712A/12/13 Figure 3-2. MVME712-13 Parts Location Drawing (Primary Side) 3-26 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual...
  • Page 60 MVME 712A/AM Figure 3-3. MVME712A Parts Location Drawing (Primary Side) MVME712A/D3 Parts Lists and Locations 3-27...
  • Page 61 Support Information MVME 712A/12/13 3-28 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual...
  • Page 62 Figure 3-4. MVME712AM Parts Location Drawing (Primary Side) MVME712-12 and MVME712-13 MVME712A/D3 Parts Lists and Locations SECONDARY SIDE SECONDARY SIDE cb223 9310 cb227 9212 3-29...
  • Page 63 Support Information Figure 3-5. MVME712 x Parts Location Drawing (Secondary Side) Table 3-16. MVME712B Module Parts List Reference Designation 3-30 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual MVME712A and MVME712AM Motorola Part Number 64-W6846B01A Front panel 30-W2348C01A Cable Assembly, Ethernet...
  • Page 64 Parts Lists and Locations MVME 712B cb208 9212 Figure 3-6. MVME712B Parts Location Drawing MVME712A/D3 3-31...
  • Page 65 Table 3-17. LCP2 Adapter Module Parts List Reference Designation C1-C3 R1-R3 Figure 3-7. LCP2 Adapter Module Parts Location Drawing 3-32 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual Motorola Part Number 84-W8570B01A Printed wiring board 48NW9607A20 RectiÞer, 1N5817, 20 V 21NW9632A03 Capacitor, Þxed, ceramic, 0.1 F @ 50 Vdc...

  • Page 66: Schematic Drawings

    Schematic Drawings This section includes the schematic drawings for the MVME712x Transition Modules and the LCP2 Adapter Board, as follows: Module MVME712-12 MVME712-13 MVME712A MVME712AM LCP2 MVME712A/D3 Board Part Number Pages 63BW3832B0A Pages 3-33 to 3-38 63BW3838B0A Pages 3-39 to 3-44...
  • Page 67 Support Information 3-34 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual...

  • Page 68: General Description

    General Description The UDS 2242980 modem installed on the MVME712-13 or MVME712AM module provides full duplex operation over the 2-wire Public Switch Telephone Network (PSTN). The unit operates asynchronously at data rates of 0 to 300, 600, 1200, or 2400 bps, and synchronously at data rates of 1200 and 2400 bps.

  • Page 69: Modem Features

    Audio output Low power consumption Low power requirements Integral test features MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual Table A-1. Modem Features BeneÞts Versatility. The modem can operate with either Bell 103J or 212A or CCITT V.22 bis modems.
  • Page 70 Technical Specifications Table A-2 lists the technical specifications of the manual and the characteristics of the Autodialer. Table A-2. Technical Specifications Characteristic Operating mode Data rates Modulation Compatibility Digital interface Transmit carrier frequency Transmitter output level Line impedance Line protection Receiver dynamic range Carrier detect hysteresis Clamping...
  • Page 71 Answer back tone detector Failed call timer Billing delay Call progress messages MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual SpeciÞcation Asynchronous; ASCII 10-bit or 11-bit upper- and lowercase characters (including start, stop, and parity bits). Accepts input gross start/stop (switching) distortion up to 35%.
  • Page 72 (*) 4 backplane connector 3-1 cables, user-supplied on MVME712-12/12A 2-12 SCSI interface to MVME712B 2-16 Telco modular 2-14 caution 2-11 configuration of modem port 2-7 serial port 2-7 connector EIA-232D 3-2 EIA-232D serial port 3-1 Ethernet 3-1, 3-13, 3-15...
  • Page 73 2 select 2-7 modem port configuration 2-7 MVME1xx VMEmodules definition of term 1-1 MVME712 family definition of term 1-1 features of 1-1 module specifications 1-2 MVME712-12 P2 connector 3-1 MVME712-13 P2 connector 3-1 MVME712A J11 3-1 MVME712AM J11 3-1...
  • Page 74 Radio Frequency Interference (RFI) pro- tection 1-2 RF emissions, minimum 1-3 RING and TIP 3-14 RJ-11 jack 3-20, 3-21, 3-22 SCSI and modem internal connections (drawing) 2-15 SCSI connector 3-9, 3-11 SCSI INTERFACE 3-11 SCSI termination 2-8 SCSI, internal connections 2-13 SCSI, problems 2-13, 2-17 serial port 2 select 2-7 serial port configuration 2-7...

This manual is also suitable for:

Mvme712aMvme712a/d3Mvme712-13Mvme712amMvme712bMvme712 series ... Show all

Table of Contents