Lenovo ideacentre 700–24ISH Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. ideacentre 700-24ISH
  6. Hardware maintenance manual

Lenovo ideacentre 700–24ISH Hardware Maintenance Manual

Hide thumbs Also See for ideacentre 700–24ISH:
Table of Contents

Advertisement

Quick Links

ideacentre All-In-One 700 Hardware
Maintenance Manual
Machine Types: F0BE [700–24ISH/Energy Star]/F0BG
[700–24AGR/Energy Star]/F0BD [700-27ISH / Energy Star]

Advertisement

Table of Contents
loading

Related Manuals for Lenovo ideacentre 700–24ISH

Summary of Contents for Lenovo ideacentre 700–24ISH

  • Page 1 ideacentre All-In-One 700 Hardware Maintenance Manual Machine Types: F0BE [700–24ISH/Energy Star]/F0BG [700–24AGR/Energy Star]/F0BD [700-27ISH / Energy Star]...
  • Page 3 ideacentre All-In-One 700 Hardware Maintenance Manual Machine Types: F0BE [700–24ISH/Energy Star]/F0BG [700–24AGR/Energy Star]/F0BD [700-27ISH / Energy Star]...
  • Page 4 First Edition (July 2015)20th © Copyright Lenovo 2015. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software are delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925...

  • Page 5: Table Of Contents

    Selecting a startup device ..Removing the rear deco ... Exiting the Lenovo BIOS Setup Utility program . . Replacing the camera ... .
  • Page 6 ideacentre All-In-One 700 Hardware Maintenance Manual...

  • Page 7: Chapter 1. About This Manual

    Chapter 1. About this manual This manual contains service and reference information for Lenovo AIO 700–24ISH and AIO 700–25AGR computers listed on the cover. It is intended only for trained servicers who are familiar with Lenovo computer products. Before servicing a Lenovo product, be sure to read the Safety Information.
  • Page 8 ideacentre All-In-One 700 Hardware Maintenance Manual...

  • Page 9: Chapter 2. Safety Information

    Electrical current from power, telephone, and communication cables can be hazardous. To avoid personal injury or equipment damage, disconnect any attached power cords, telecommunication cables, network cables, and modem cables before you open the computer covers, unless instructed otherwise in the installation and configuration procedures. © Copyright Lenovo 2015...
  • Page 10 Observe the following rules when working on electrical equipment. Important: Use only approved tools and test equipment. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their equipment that contain small conductive fibers to decrease electrostatic discharge.

  • Page 11: Safety Inspection Guide

    – Switch off power. – Send another person to get medical aid. Safety inspection guide The intent of this inspection guide is to assist you in identifying potential hazards posed by these products. Each computer, as it was designed and built, had required safety items installed to protect users and service personnel from injury.

  • Page 12: Grounding Requirements

    • Keep the parts in protective packages until they are inserted into the product. • Avoid contact with other people while handling the part. • Wear a grounded wrist strap against your skin to eliminate static on your body. • Prevent the part from touching your clothing. Most clothing is insulative and retains a charge even when you are wearing a wrist strap.
  • Page 13 To Connect To Disconnect 1. Turn everything OFF. 1. Turn everything OFF. 2. First, attach all cables to devices. 2. First, remove power cords from outlets. 3. Attach signal cables to connectors. 3. Remove signal cables from connectors. 4. Attach power cords to outlet. 4.
  • Page 14 ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) CAUTION: Use safe practices when lifting. CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord.

  • Page 15: Chapter 3. General Information

    This section lists the physical specifications. Environment Air temperature: Operating: 10° to 35°C Transit: -20° to 55°C Humidity: Operating: 35% to 80% Transit: 20% to 90% (40°C) Altitude: 86KPa to 106KPa Electrical input: Input voltage: 90V-264V(AC) Input frequency: 47Hz-63Hz © Copyright Lenovo 2015...
  • Page 16 ideacentre All-In-One 700 Hardware Maintenance Manual...

  • Page 17: Chapter 4. General Checkout

    • If the computer displays a POST error, go to “POST error codes”. • If the computer hangs and no error is displayed, continue at step 7. 7. If the test stops and you cannot continue, replace the last device tested. © Copyright Lenovo 2015...
  • Page 18 ideacentre All-In-One 700 Hardware Maintenance Manual...

  • Page 19: Chapter 5. Using The Setup Utility

    1. If your computer is already on when you start this procedure, shut down the operating system and turn off the computer. 2. Press and hold the F1 key, and then turn on the computer. When the Lenovo BIOS Setup Utility program is displayed, release the F1 key.
  • Page 20 5. Select Save changes and Exit from the menu. Power-On Password When a Power-On Password is set, you cannot start the Lenovo BIOS Setup Utility program until a valid password is typed from the keyboard. Setting, changing, or deleting a Power-On Password Note: A password can be any combination of letters and numbers up to 16 characters (a-z and 0-9).

  • Page 21: Enabling Or Disabling A Device

    To set a Power-On Password, do the following: 1. Start the Lenovo BIOS Setup Utility program (See ”Starting the Lenovo BIOS Setup Utility program” on page 13.) 2. From the Security menu, select Set Power-On Password and press the Enter key.

  • Page 22: Selecting A Startup Device

    Selecting or changing the startup device sequence To view or permanently change the configured startup device sequence, do the following: 1. Start the Lenovo BIOS Setup Utility program (see “Starting the Lenovo BIOS Setup Utility program” on page 13). 2. From the Lenovo BIOS Setup Utility program main menu, select the Startup option.

  • Page 23: Exiting The Lenovo Bios Setup Utility Program

    Exiting the Lenovo BIOS Setup Utility program After you finish viewing or changing settings, press the Esc key to return to the Lenovo BIOS Setup Utility program main menu. You might have to press the Esc key several times. Do one of the following: •...
  • Page 24 ideacentre All-In-One 700 Hardware Maintenance Manual...

  • Page 25: Chapter 6. Symptom-To-Fru Index

    Check that the following are properly installed: Reseat connectors • Power Cord • On/Off Switch connector • System Board Power Supply connectors • Microprocessor connections Check the power cord. Power Cord Check the power-on switch. Power-on Switch © Copyright Lenovo 2015...

  • Page 26: Post Error Codes

    POST error codes Each time you turn the computer on, it performs a series of tests to check that the system is operating correctly and that certain options are set. This series of tests is called the Power-On Self-Test, or POST. POST does the following: •...

  • Page 27: Chapter 7. Hardware Components

    10. Solid state drive 24. 3D webcam module 11. Foot cover 25. 2D webcam module 12. Side I/O shielding 26. 3D webcam MIC module 13. Computer stand 27. AC bracket 14. Rear deco 28. Power connector © Copyright Lenovo 2015...
  • Page 28 Identifying parts on the motherboard of AIO 700–24ISH(FHD) and AIO 700–27ISH(FHD) 12 13 14 1. System fan connector 15. USB 3.0 connector 2. Power connector 16. HDMI-in connector 3. SATA power connector 17. Speaker connector 4. Optical drive SATA connector 18.
  • Page 29 Identifying parts on the motherboard of AIO 700–24ISH(UHD) and AIO 700–27ISH(UHD) 14 15 16 1. System fan connector 16. USB 3.0 connector 2. Power connector 17. HDMI-in connector 3. SATA power connector 18. Speaker connector 4. Optical drive SATA connector 19.
  • Page 30 Identifying parts on the motherboard of AIO 700–24AGR 14 15 16 1. System fan connector 14. USB 2.0 connector 2. Power connector 15. USB 2.0 connector 3. SATA power connector 16. USB 3.0 connector 4. Optical drive SATA connector 17. HDMI-in connector 5.

  • Page 31: Chapter 8. Replacing Hardware

    Attention: Do not remove the computer cover or attempt any repair before reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer. To obtain copies of the Safety and Warranty Guide, go to the Support Web site at: http://consumersupport.lenovo.com. Note: Use only parts provided by Lenovo.

  • Page 32: Replacing The Keyboard And Mouse

    Replacing the keyboard and mouse Note: Your keyboard will be connected to a USB connector at either side or at the rear of the computer. To replace the keyboard and mouse: Step 1. Remove any media (disks, CDs, or memory cards) from the drives, shut down the computer, and turn off all attached devices.

  • Page 33: Removing The Stand Base

    Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches or other damage.

  • Page 34: Removing The Foot Cover

    Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches or other damage.

  • Page 35: Replacing The Memory Module

    Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches or other damage.

  • Page 36: Replacing The Hard Disk Drive

    Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches or other damage.

  • Page 37: Replacing The Optical Drive

    Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches or other damage.
  • Page 38 Step 6. Locate the optical removal notch, and then push the optical drive out using a screwdriver. Step 7. Push a small iron stick or paper clip into the small hole on the optical drive cover so that the disk springs out as shown. Step 8.

  • Page 39: Removing The Stand Holder

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.
  • Page 40 Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 41: Replacing The Converter Board

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 42: Removing The Emi Cover

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 43: Replacing The Wi-Fi Card

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 44: Replacing The Heat-Sink

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 45: Replacing An Intel Cpu

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.
  • Page 46 Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to “Left and right view” and “Rear view” for help with locating the various connectors. Step 4.

  • Page 47: Replacing An Amd Cpu

    Step 12. Holding the sides of the microprocessor with your fingers, remove the protective cover that protects the gold contacts on the new microprocessor. Step 13. Holding the sides of the microprocessor with your fingers, position the microprocessor so that the notches on the microprocessor are aligned with the tabs in the microprocessor socket.
  • Page 48 Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.
  • Page 49 Step 12. Holding the sides of the microprocessor with your fingers, remove the protective cover that protects the gold contacts on the new microprocessor. Step 13. Holding the sides of the microprocessor with your fingers, position the microprocessor so that the notches on the microprocessor are aligned with the tabs in the microprocessor socket.

  • Page 50: Replacing The System Fan

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 51: Replacing The Speaker System

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 52: Replacing The Power Switch Board

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 53: Replacing The Motherboard

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.
  • Page 54 To replace the motherboard: Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Step 2. Unplug all power cords from electrical outlets. Step 3.

  • Page 55: Removing The Rear Deco

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 56: Replacing The Camera

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 57: Replacing The Lcd Panel Module

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.
  • Page 58 Step 8. Remove the middle cover. Refer to “Removing the middle cover”. Step 9. Remove the EMI cover. Refer to “Removing the EMI cover”. Step 10. Remove the system fan. Refer to “Replacing the system fan”. Step 11. Remove the speaker system. Refer to “Replacing the speaker system”. Step 12.
  • Page 59 Step 20. To install the new the LCD panel module: The new LCD panel module including: 1. LCD panel 2. LVDS cable 3. Touch control board and touch cable. Line up the chassis with new LCD panel module, place the chassis into position. Connect the converter cable to the connector on the LCD panel.
  • Page 60 ideacentre All-In-One 700 Hardware Maintenance Manual...

  • Page 61: Chapter 9. Fru Lists

    CABLE 31049524 LX(ASAP) 1.8M C13 ANZ power cord CABLE 31049522 LX(ASAP) 1.8M C13 EU power cord CABLE 31031394 LW BLK1.8m SABS Power Cord(R) CABLE 31028776 GS BLK1T1 1.8m CCC Power cord(R) CABLE 00XD171 CVTER_MB,AIO 700-24 CABLE © Copyright Lenovo 2015...
  • Page 62 31026145 VL BLK1.8m UL CSA Power Cord(R) CABLE 31039730 Longwell 1.8M PSE C13 power cord(R) CABLE 31038784 Longwell 1.8M 1.8m Brazilpower cord® CABLE 31049513 Volex 1.8M C13 BR power cord CABLE 31039729 Longwell 1.8M Denmark C13 power cord(R) CABLE 31049514 Volex 1.8M C13 JPN power cord CABLE 31026144...
  • Page 63 16200689 ST Grenada BP2 ST2000DM001 2TB HDD HDD_ASM 45K0625 HDD,2TB,7200,DT3,SATA3,STD HDD_ASM 00KT200 Heatsink 65W w/o BP AIO 700-24ISH HEATSINK 00KT201 Heatsink 65+25W w/o BP AIO 700-24ISH HEATSINK 00KT202 Heatsink 65+40W w/o BP AIO 700-24ISH HEATSINK 00XD026 STAND,LIGHT SILVER HINGE 00XD025 STAND,DARK SILVER HINGE 25209194...
  • Page 64 25210993 Liteon SK-8861(RU) 2.4G KB-White8 KYB_MOUSE 25209187 Liteon SK-8861(CH) 2.4G KB-Black8 KYB_MOUSE 25209129 Sunrex EKB-10YA(HB) B-Silk USB KB-LVT8 KYB_MOUSE 25209195 Liteon SK-8861(GR) 2.4G KB-Black8 KYB_MOUSE 25211011 Liteon SK-8861(JP) 2.4G KB-White8 KYB_MOUSE 25209190 Liteon SK-8861(ES) 2.4G KB-Black8 KYB_MOUSE 25211016 Liteon SM-8861(WW) 2.4G Mouse White KYB_MOUSE 25209114 Sunrex EKB-10YA(TW) B-Silk USB KB-LVT8...
  • Page 65 25209172 Sunrex EKB-10YA(US-EU) W-S USB KB-LVT8 KYB_MOUSE 25209168 Sunrex EKB-10YA(JP) W-Silk USB KB-LVT8 KYB_MOUSE 25209152 Sunrex EKB-10YA(UK) W-Silk USB KB-LVT8 KYB_MOUSE 25209160 Sunrex EKB-10YA(SL) W-Silk USB KB-LVT8 KYB_MOUSE 25209131 Sunrex EKB-10YA(GK) B-Silk USB KB-LVT8 KYB_MOUSE 25209165 Sunrex EKB-10YA(HG) W-Silk USB KB-LVT8 KYB_MOUSE 25209125 Sunrex EKB-10YA(TR) B-Silk USB KB-LVT8...
  • Page 66 25209201 Liteon SK-8861(PT) 2.4G KB-Black8 KYB_MOUSE 25209133 Sunrex EKB-10YA(BG) B-Silk USB KB-LVT8 KYB_MOUSE 25209170 Sunrex EKB-10YA(PT) W-Silk USB KB-LVT8 KYB_MOUSE 25210992 Liteon SK-8861(US-IN) 2.4G KB-White8 KYB_MOUSE 25211007 Liteon SK-8861(GR) 2.4G KB-White8 KYB_MOUSE 00XD800 ODD Fixer Latch,AIO 700-24 LATCH 31502869 LX(ASAP) 1.8M C13 ARGENTINA power cord LINECORD 31502867 LX(ASAP) 1.8M C13 BSMI power cord...
  • Page 67 1100983 M471B5674QH0-YK0 2GB DDR3L 1600 Sodimm MEMORY 1100986 HMT41GS6BFR8A-PB 8GB DDR3L 1600 Sodimm MEMORY 1101012 Mic_R D9QBJ ?8GB D3L-1600 Sodimm MEMORY 03T7118 SODIMM,8G,DDR3L,1600 MEMORY 1100985 HMT451S6BFR8A-PB 4GB DDR3L 1600 Sodimm MEMORY 1100956 MT4KTF25664HZ-1G6E1 2GB 1600 Sodimm MEMORY 1100957 MT8KTF51264HZ-1G6E1 4GB 1600 Sodimm MEMORY 03T7116 SODIMM,2G,DDR3L,1600...
  • Page 68 ODD Bazel Mainboard Frame Heat Sink Power supply Power connector bracket Power connector Speaker Motherboard CPU Holder CMOS Battery Maylar Northbridge heat sink Thermal paste Camera Module=Camera+Camera Holder Camera Camera rubber Camera Holder Microphone rubber*2 Microphone board Microphone cable Wi-Fi card LCD Module=LCD+LVDS Cable+Converter Cable to LCD+Power Switch Cable+Chassis LVDS...
  • Page 69 Keyboard Mouse Power cord RF Antenna FRU=RF cable+Antenna+Adhesive Rf cable Antenna Adhesive I/O Bracket Rear Deco Invertor board Chapter 9 FRU lists...
  • Page 70 FRUs for ideacentre AIO 700–27ISH Fru P/N Description Basic Name 00XD068 ANTENNA WLAN,MAIN/AUX, AIO 700-27ISH 00UW031 GTX950A 2G 3D UHD WIN DPK BDPLANAR 00UW030 GTX950A 2G 3D UHD NO DPK BDPLANAR 00UW017 GTX950A 2G 3D FHD WIN DPK BDPLANAR 00UW016 GTX950A 2G 3D FHD NO DPK BDPLANAR 00UW010...
  • Page 71 31049516 Volex 1.8M C13 SWI power cord CABLE 31040179 LX(ASAP) 1.8M CCC C13 power cord(R) CABLE 00XD061 SATA_HDD_ODD_PW,AIO 700-27ISH CABLE 31049524 LX(ASAP) 1.8M C13 ANZ power cord CABLE 31026082 VL BLK1.8m BS Power Cord(R) CABLE 31049514 Volex 1.8M C13 JPN power cord CABLE 31026351 LW BLK1.8m KTL Power Cord(R)
  • Page 72 25209132 Sunrex EKB-10YA(HG) B-Silk USB KB-LVT8 KYB_MOUSE 25209123 Sunrex EKB-10YA(SW) B-Silk USB KB-LVT8 KYB_MOUSE 25209195 Liteon SK-8861(GR) 2.4G KB-Black8 KYB_MOUSE 25209203 Liteon SK-8861(US-EU) 2.4G KB-Black8 KYB_MOUSE 25209116 Sunrex EKB-10YA(CZ-SL) B-S USB KB-LVT8 KYB_MOUSE 25209179 Liteon SK-8861(CS-SK) 2.4G KB-Black8 KYB_MOUSE 25209181 Liteon SK-8861(RU) 2.4G KB-Black8 KYB_MOUSE 25209199...
  • Page 73 25209198 Liteon SK-8861(KR) 2.4G KB-Black8 KYB_MOUSE 25209178 Liteon SK-8861(TH) 2.4G KB-Black8 KYB_MOUSE 25209112 Primax KB4721(US) B-Silk USB KB-LVT8 KYB_MOUSE 25209133 Sunrex EKB-10YA(BG) B-Silk USB KB-LVT8 KYB_MOUSE 25209124 Sunrex EKB-10YA(GE) B-Silk USB KB-LVT8 KYB_MOUSE 25209202 Liteon SK-8861(BE-EN) 2.4G KB-Black8 KYB_MOUSE 25209189 Liteon SK-8861(TR) 2.4G KB-Black8 KYB_MOUSE 25209125...
  • Page 74 03T7415 16G,SODIMM,DDR4,2133MHz MEMORY 01AH400 Microphone Dualch Mic 12D B5B MICROPHONE 00PC592 Doking M680B B-Silk USB MC BLK MOUSE 00FC442 SMD,DT,SATA,9.5mm,x8,w/o bezel OPT_DRIVE 00XG043 EX-ODD DVD Burner DB65 OPT_DRIVE 54Y8943 PWR_SUPPLY,100-240Vac,200W PWR_SUPPLY 54Y8946 PWR_SUPPLY,100-240Vac,180W PWR_SUPPLY 00XD813 SSD Shielding,AIO 700-24 SHIELD 03T7446 Intel Core i7-6700 3.4G 4C 03T7445 Intel Core i5-6400 2.7G 4C...
  • Page 75 Speaker Motherboard CPU Holder CMOS Battery Maylar Northbridge heat sink Thermal paste Camera Module=Camera+Camera Holder Camera Camera rubber Camera Holder Microphone rubber*2 Microphone board Microphone cable Wi-Fi card LCD Module=LCD+LVDS Cable+Converter Cable to LCD+Power Switch Cable+Chassis LVDS Power switch Cable Converter Cable to LCD A cover Glass...
  • Page 76 Rear Deco Invertor board ideacentre All-In-One 700 Hardware Maintenance Manual...

  • Page 77: Chapter 10. General Information

    • Wake Up on Alarm: You can specify a date and time at which the computer will be turned on automatically. This can be either a single event , a daily event or a weekly event. • Wake Up on LAN: This feature allows LAN adapter card to wake the System. © Copyright Lenovo 2015...

This manual is also suitable for:

Ideacentre 700–25agrAio 700 seriesF0be700–24ishF0bg700–24agr ... Show all

Table of Contents