Daewoo DWD-M8011 Service Manual page 28

DISPLAY ERROR MESSAGE
When mechanical or electrical troubles of the washer are occurred, indicator lights of buttons twinkle
simultaneously as follows;
ERROR
MESSAGE
IE
PFE, OE, E4
E7, E8
E2, E9
H2, H4, H5, H6, H8
UE
LE
MESSAGE ERROR
IE WATER INLET
ERROR
DRAIN
OE ERROR
UE UNBALANCE
ERROR
LE DOOR OPEN
ERROR
Start/Hold Intensive wash
CAUSE
The water tap is closed.
The filter of the valve inlet is clogged.
The valve inlet is an inferior product or broke
down.
The water level sensor (sensor pressure) is an
inferior product or broke down.
The drain motor works during water supply.
The PCB ASS'Y does not check the water level.
The drain hose is kinked or clogged.
The drain motor is an inferior product.
The valve inlet works during drain.
The water level sensor is an inferior product.
The PCB ASS'Y does not check the water level.
The laundry is concentrated to one side of the
drum during spin.
The Start/Hold button is pressed while the door is
opened.
The switch door lock is an inferior product.
The PCB ASS'Y does not check the door lock.
Indicator Light twinkling
Rinse+
Open the water tap.
Clean the filter of the valve inlet.
Change the valve inlet.
Change the water level sensor
(sensor pressure).
Change the drain motor.
Change the PCB ASS'Y.
Clean and straighten the drain hose.
Change the drain motor.
Change the valve inlet
Change the water level sensor.
Change the PCB ASS'Y.
Rearrange the laundry.
Close the door.
Change the switch door lock.
Change the PCB ASS'Y.
Rinse Hold
SOLUTION
TROUBLESHOOTING GUIDE
27