Switching On; Selecting A Programme; Starting A Programme; Programme Sequence Indicators - Miele g1022scu Operating Instructions Manual

Operation

Switching on

^ Make sure the spray arms are not
obstructed.
^ Close the door.
^ Open the stopcock, if it is closed.
^ Switch the dishwasher on using the
K button.
The End indicator light comes on if the
programme selector is not pointing at a
programme.

Selecting a programme

Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
Overview later on in this booklet.
34

Starting a programme

^ Turn the programme selector
clockwise or anti-clockwise to the
required programme.
The Start/Stop indicator light will flash.
^ Press the Start/Stop button.
The programme will begin. The
Start/Stop and Wash/Rinse indicator
lights will come on.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
Programme sequence
indicators
After a programme has been started
the current stage of the programme is
indicated by the programme sequence
indicator lights.