Table of Contents
Advertisement
7.
On the Volume Mapping page, for each volume in the recovery point that you want to restore, select
the appropriate destination volume. If you do not want to restore a volume, in the Destination
Volumes column, select Do not restore.
8.
Select Show advanced options and then do the following:
•
For restoring to Windows machines, if you want to use Live Recovery, select Live Recovery.
Using the Live Recovery instant recovery technology in AppAssure, you can instantly recover or
restore data to your physical machines or to virtual machines from stored recovery points of
Windows machines, which includes Microsoft Windows Storage Spaces. Live Recovery is not
available for Linux machines.
•
If you want to force dismount, select Force Dismount.
If you do not force a dismount before restoring data, the restore may fail with a volume in use
error.
9.
Proceed to Step 20.
10. On the Boot CD page, do the following:
a. In the Output path text field, type the path where the boot CD ISO image should be stored,
b. Under Environment select the architecture best suited for the hardware you are restoring:
•
To restore on any Windows machine with a 64-bit architecture, select Windows 8 64-bit.
•
To restore on any machine with a 32-bit (x86) architecture, select Windows 7 32-bit.
11. Optionally, to set up network parameters for the restored agent, or to use UltraVNC, select Show
advanced options and do one of the following:
•
To establish a network connection for the restored machine, select Use the following IP address
as described in the following table.
Option
IP Address
Subnet Mask
Default Gateway
DNS Server
•
To define UltraVNC information, select Add UltraVNC as described in the following table. Use this
option if you require remote access to the recovery console. You cannot log on using Microsoft
Terminal Services while using the boot CD.
Option
Password
Port
12. Click Next.
13. To inject a driver, do the following:
a. Select Add an archive of drivers.
b. Navigate to a ZIP file containing the archive, select the ZIP file, and click Open. The archive
uploads and appears in the Driver Injection page.
c. Then click Next.
14. On the ISO Image page, you can see the status as the boot CD ISO image is created. When the boot
CD is successful, click Next.
The Connection page appears.
15. Start the agent machine for which you want to restore data from the boot CD.
70
Description
Specify an IP address or host name for the restored machine.
Specify the subnet mask for the restored machine.
Specify the default gateway for the restored machine.
Specify the domain name server for the restored machine.
Description
Specify a password for this UltraVNC connection.
Specify a port for this UltraVNC connection. The default port is 5900.
Advertisement
Table of Contents
