Page 3
All Motorola phones are designed and manufactured to meet Motorola’s rigorous specifications and world-class quality standards. During development, our testing team took the Motorola tests including temperature, humidity, shock, dust, vibration, and drop tests. We are confident that you and your callers will find your wireless phone to be a convenient and reliable way to stay in touch.
Page 4
MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. TrueSync is a trademark of Starfish, Inc., a wholly owned independent subsidiary of Motorola, Inc. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc.
Phone Diagram Power Key Earpiece Headset Jack Insert headset accessory. Volume Keys Adjust earpiece and ringer volume. Left Soft Key Perform functions identified by left display prompt. End Key End phone calls, exit menu system. Speakerphone Key Activate/deactivate the speakerphone. Antenna Extend for best performance...
To obtain a copy of the reference guide or another copy of this user guide, see the Motorola Web site at: http://motorola.com/consumer/manuals or contact the Motorola Customer Call Center at 1-800-331-6456.
These features may not be offered by all service providers in all geographical areas. Contact your service provider for information about availability. Optional Accessories Features marked with this label require the use of an optional Motorola Original™ accessory.
0.05 watts to 0.54 watts in analog mode and 0.0 watts to 0.25 watts in digital mode. Exposure To Radio Frequency Energy Your Motorola phone is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME): •...
Safety and General Information • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1- 1999 Edition • National Council on Radiation Protection and Measurements (NCRP) of the United States, Report 86, 1986 •...
To maintain compliance with FCC RF exposure guidelines, if you wear a phone on your body when transmitting, always place the phone in a Motorola-supplied or approved clip, holder, holster, case, or body harness. Use of non-Motorola-approved accessories may exceed FCC RF exposure guidelines.
When using any data feature of the phone, with or without an accessory cable, position the phone antenna at least one inch (2.5 centimeters) from your body. Approved Accessories For a list of approved Motorola accessories, visit our website at www.motorola.com. Electromagnetic Interference/ Compatibility...
Safety and General Information Medical Devices Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless phone and a pacemaker. These recommendations are consistent with the independent research by, and recommendations of, Wireless Technology Research.
Safety and General Information Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Safety and General Use While Driving Check the laws and regulations on the use of phones in the area...
Safety and General Information Potentially Explosive Atmospheres Turn off your phone prior to entering any area with a potentially explosive atmosphere, unless the phone is a model specifically identified as being “Intrinsically Safe” for use in such areas (for example, Factory Mutual, CSA, or UL Approved). Do not remove, install, or charge batteries in such areas.
Safety and General Information Operational Cautions Antennas Do not use any portable phone that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. Batteries All batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals.
Other accessory options can customize your phone for maximum performance and portability. The following illustrations show a sample of the package contents. Note: Your phone and accessories may not look exactly as pictured. Motorola Telephone Battery Holster...
Before you can use your phone, you need to install and charge the battery. Your phone is designed to be used only with Motorola Original batteries and accessories. We recommend that you store batteries in their protective cases when not in use.
Page 25
Getting Started Do This 1 Remove the battery from its protective clear plastic case. 2 If the phone’s battery door is already in place, push down the battery door release latch, then slide the door down and lift off. 3 Insert the battery, printed arrows first, into the battery compartment and push down.
Getting Started Charging the Battery Before you can use your phone, you need to install and charge the battery. Do This 1 Plug the travel charger into your phone with the release tab facing up. 2 Plug the other end of the travel charger into the appropriate electrical outlet.
Getting Started Turning Your Phone On Do This 1 Press and hold the power key turn on your phone Power 2 Enter your four-digit unlock code and press unlock your phone, if necessary The unlock code is originally set to 1234. (For more information, see “Locking and Unlocking Your Phone”...
Getting Started Sending a Call To call a number, your phone must be turned on, be unlocked, and have a network connection with adequate signal strength. Do This 1 Extend the antenna optimize signal reception 2 Press the keypad keys 3 Press (send key) Ending a Call...
Getting Started Receiving a Call To receive a call, your phone must be turned on and have a network connection with adequate signal strength. If your phone is locked, you must unlock the phone to answer the call. When you receive a call, your phone rings and/or vibrates and displays an incoming call message.
About Your Phone See page 5 for a diagram of your phone that describes basic phone components. Display The top section of the display shows phone status indicators. The following illustration shows some of the common indicators that you may see at the top of the display when using your phone. Messages, phone numbers, and menu options appear in the middle of the display.
Page 31
About Your Phone In Use Indicator Signal Strength Indicator Alert Setting Indicator Digital/ Analog Signal Indicator Signal Strength Indicator Shows the strength of your phone’s connection with the network. Strong You cannot send or receive calls when the “no signal” indicator is displayed.
Page 32
About Your Phone Message Waiting Indicator Appears when your phone receives a text message. Voice Message Waiting Indicator Appears when you receive a voicemail message. Battery Level Indicator Shows the amount of charge left in your battery. The more segments visible, the greater the charge.
About Your Phone Changing the Zoom Setting You can set your phone’s display to show either six lines or four lines of text plus soft key labels. Six lines of text display more information, while four lines increase text size. To change the display view, press hold again within two seconds of the first press.
About Your Phone You can also use the volume keys to scroll up or down through menus and lists. To change keypad volume, see “Select a Ring/Vibration for a Specific Event” on page 116. 4-Way Navigation The 4-way navigation key is a joystick that lets you move through the menu.
Caution: To prevent injuries or burns, do not allow metal objects to contact or short-circuit the battery terminals. To maximize your battery’s performance: • Always use Motorola approved batteries and battery chargers. The phone warranty does not cover damage caused from using non-Motorola batteries and/or battery chargers.
Page 36
About Your Phone • Do not expose batteries to temperatures below -10°C (14°F) or above 45°C (113°F). Always take your phone with you when you leave your vehicle. • When you do not intend to use a battery for a while, store it uncharged in a cool, dark, dry place, such as a refrigerator.
Sending and Receiving Calls For basic instructions on how to send a call, end a call, and receive a call, see page 26 of the “Getting Started” section. Redialing a Number If you hear an ordinary busy signal, the phone number you dialed is busy.
Sending and Receiving Calls When the call goes through, your phone rings or vibrates once, displays Redial Successful automatically. You must activate automatic redial in order to use the feature. See the “Auto Redial” item on page 62. Caller ID The calling line identification (caller ID) feature lets you see who is calling before you answer.
Sending and Receiving Calls Press VIEW Dialing an Emergency Number When the Phone is Locked Your service provider may program one or more emergency phone numbers that you can call even if your phone is locked or restricted. When you see Enter Unlock Code Press 1 keypad keys...
Sending and Receiving Calls Entering Numbers in the Notepad Your phone stores the most recent string of digits entered on the keypad in a temporary memory location called the notepad . These digits can be the last phone number that you called, or a phone number that you simply entered but did not call.
Sending and Receiving Calls Terminating an Incoming Call While the phone is ringing or vibrating: Press IGNORE Depending on your phone settings and the type of subscription you have with your service provider, the call may be forwarded to another number, or the calling party may hear a busy signal. Dialing With Speed Dial The speed dial feature lets you dial any phonebook entry with a minimal number of keypresses.
Sending and Receiving Calls To make an entry in the phonebook or view an existing entry’s speed dial number, see “Storing a Phonebook Entry” on page 76. Dialing With One-Touch Dial You can call phonebook entries 2 through 9 with the push of a single key.
Sending and Receiving Calls Dialing a Number In a Text Message If you receive a text message with an embedded phone number, you can dial the number directly. Note: You must set up your inbox before opening text messages. See “Setting Up the Text Message Inbox”...
Sending and Receiving Calls Additional Dialing Features In addition to pressing numbers on your keypad, you can insert numbers or characters and send calls in a variety of ways. While dialing (with digits visible in the display): Do This Press and then scroll to and select one of the following:...
Page 45
Sending and Receiving Calls You can also call numbers using these features: Do This Press and release the voice key on the right side of your phone and say the entry’s name (in two seconds). Press > Recent Calls > Received Calls Dialed Calls >...
Using Features While On a Call Using Call Waiting If you subscribe to call waiting, an alert tone sounds while you are on a call to indicate that you have received a second call. To put the first call on hold and answer the second call: Press To end the first call and answer the second call: Press...
Using Features While On a Call Making a Three-Way Call During a call, you can call and connect a third party so that the three of you can talk together. You cannot do this if you already have a call on hold. During a call: Press 1 keypad keys...
Using Features While On a Call Additional On-Call Features While you are on a call, you can perform the following tasks: Do This MUTE Press Press Press > My Tel. Number Press > Send Tones mute a call activate and deactivate the integrated speakerphone during a call (hands-free mode) see your phone number...
Using the Menu Navigating to a Feature You can access many of your phone’s features by using these keys to move through the menu system: Left Soft Key Perform the function shown in the lower left corner of the display (usually EXIT BACK Menu Key...
Using the Menu This guide shows you how to navigate to a specific menu feature as follows: Find the Feature The > symbol means that you should scroll to and select the feature. This example shows that you must press and select Recent Calls to see the dialed calls list.
Using the Menu Select an item by highlighting it. Use one of the following approaches: • Press to scroll up or down to the item you want. • In a numbered list, press a number key to highlight the item. •...
Page 52
Using the Menu • Enter numbers or text with the keypad. (See “Entering Text” on page 52.) • When an item has a list of possible values, press left or right to scroll through and select a value. • When an item has a list of possible numeric values, press a number key to set the value.
Page 53
Using the Menu When you enter text, the flashing cursor changes to a block cursor , and the soft key functions change: Block cursor indicates Msg: current highlighted character. DELETE After two seconds, the block cursor reverts to a flashing cursor and moves to the next position.
Using the Menu Entering Text General Text Entry Rules Use the keypad to enter letters, numbers, and other characters. Press the same key repeatedly to cycle through available characters (see “Character Chart” on page 53): Press a number key to enter text at flashing cursor location.
Using the Menu • If you do not press a key for two seconds, the character in the block cursor is accepted, and the cursor moves to the next position. • The first character of every sentence is capitalized unless you manually override it.
Using the Menu Predictive Text Entry with iTAP Software iTAP™ software provides a predictive text entry method that lets you enter the letters of a word using only one keypress per letter. Activating and Deactivating iTAP Software You must activate iTAP software prior to entering letters. You can do this from any text entry screen by pressing iTAP menu option.
Page 57
Using the Menu Do This 3 When you have entered all the letters of the word, press 4 Press SELECT For example, to spell the word “act,” press display shows: Flashing cursor indicates Msg: insertion point. Act Bat Abu DELETE DELETE Press clear the last letter entered.
Page 58
Using the Menu Entering Novel Words You may enter a word that is not in the iTAP software dictionary. If you enter all the letters of a word but the word is not displayed: Do This 1 Press DELETE or more times 2 Press 3 Press SELECT...
Using the Menu Capitalization The first word of a sentence is automatically capitalized, with following words in lowercase. To set or adjust character capitalization: Press up or down Entering Numbers To enter a number: Do This 1 Enter the first digit and then highlight 2 Press keypad keys 3 Press...
Page 60
Using the Menu Deleting Letters and Words Place the cursor to the right of the text that you want to delete, and then do the following: Do This Press DELETE Press and hold DELETE Continue to hold DELETE delete one letter at a time delete the entire word delete the entire message...
To obtain a copy of the reference guide or another copy of this user guide, see the Motorola Web site at: http://motorola.com/consumer/manuals or contact the Motorola Customer Call Center at 1-800-331-6456.
Page 62
Menu Feature Descriptions Incoming Call Specify the format for the next incoming call. You can select Fax In Only Data In Only ATEBOOK Use the datebook calendar to schedule and review your appointments. See “Datebook” on page 84. ETUP Use the in-call setup menu to set the features that are active during a call, such as the in-call timer and call answering options.
Page 63
Menu Feature Descriptions ESSAGES Adjust message settings, view and manage the various types of messages your phone can receive and/or send: Browser Alerts Drafts Outbox Quick Notes Text Msgs Voicemail THER ETTINGS Car Settings Adjust hands-free car kit settings. You can set your phone to route calls directly to the car kit when it detects a connection, and automatically answer calls after two rings.
Menu Feature Descriptions Headset Set your phone to automatically answer calls after two rings when connected to a headset. See “Hands-Free Use” on page 119. Initial Setup Set many basic phone options: Auto PIN Dial Auto Redial Backlight Contrast Setting DTMF Language >...
Menu Feature Descriptions Master Clear Master Reset Scroll Time and Date Zoom Network View and adjust your phone’s network settings. Your service provider registers your phone to a network. You can view information about the current network, change how your phone searches for a network, and turn on/off alerts that indicate when a call is dropped or network registration changes.
Menu Feature Descriptions Personalize Set several personal phone options: Banner Greeting Keys Main Menu Quick Dial HONE TATUS Battery Meter View a detailed battery charge meter. My Tel. Number View, enter, and edit your name and phone number. > Settings Other Settings >...
ADIO Listen to FM radio stations with the optional Motorola FM radio headset accessory. This menu feature is displayed only when the FM radio headset is plugged into the accessory connector port on your phone. See “Radio” on page 91.
Menu Feature Descriptions ECENT ALLS View the numbers of your recent dialed calls and received calls. See “Recent Calls” on page 69. Call Times View call timers. You can view five timers that track time spent on your last call, dialed calls, received calls, all calls since reset, and all calls total.
Page 69
Menu Feature Descriptions Your phone keeps a list of the numbers from calls you recently received (even if you did not answer). See “Viewing the Received Calls or Dialed Calls List” on page 69. IBRATE Alert Select a type of ring or vibration alert for incoming calls and messages.
Menu Feature Descriptions New Passwords Change your unlock code (originally set to 1234) or your security code (originally set to 000000). See “Assigning a New Code or Password” on page 130. Phone Lock Lock and unlock your phone. See “Locking and Unlocking Your Phone”...
Recent Calls You can use the recent calls menu to view received calls or dialed calls, retrieve the last number stored in the notepad, and view or reset call times. Viewing the Received Calls or Dialed Calls List Your phone keeps lists of the numbers from calls you recently received and dialed, even if the calls did not connect.
Page 72
Press Recent Calls scroll to an entry you want to call, store, or delete < Note: means the call connected. call the entry’s number Tip: Press and hold seconds to send the entry number as DTMF tones. To activate DTMF tones, see the “DTMF”...
Page 73
Recent Calls Last Calls Menu Option Description Store Create a phonebook entry with the selected number in the option is not available if above the already stored as a phonebook entry.) Delete Delete the entry. (This option is not available if key.) Delete All Delete all entries in the current list.
Using the Notepad Your phone uses a notepad to store the most recent string of digits entered—either for a phone number that you called or for a number that you entered but did not call. To call the number stored in the notepad, press display.
Call Times Your phone tracks and records call times. Use the recent calls menu to view and reset a call timer. Network connection time is the elapsed time from the moment you connect to your service provider's network to the moment you end the call by pressing and ringing.
Viewing and Resetting Call Times To view a call timer: Find the Feature Press SELECT SELECT To reset the call timer: Press RESET Recent Calls Recent Calls > Call Times scroll to open the list of timers scroll to the timer you want view the recorded time reset the time (if available) confirm the reset...
Phonebook You can store a list of names and phone numbers in your phone’s electronic phonebook. Your phone can store as many as 400 entries. You can view these entries and call them directly from your phone. To see the list of names stored in your phonebook, press >...
Storing a Phonebook Entry A phone number is required for a phonebook entry. All other information is optional. Shortcut: Enter a phone number in the idle display, then press STORE ) to create a phonebook entry with the number in the field.
Page 79
Phonebook Press RECORD Go to step 11 if you do not want to record a voice name for the entry CHANGE 13 keypad keys SELECT record a voice name for the entry, if desired See “Recording a Voice Name For a Phonebook Entry”...
Complete Phonebook Entry When you are finished entering information for a phonebook entry: Press DONE Recording a Voice Name For a Phonebook Entry You can record a voice name when you create a new phonebook entry, or when you edit a previously stored phonebook entry. This lets you use voice dial to call the number without dialing (see “Voice Dial”...
Page 81
Phonebook Do This 3 Press EDIT 4 Press 5 Press RECORD 6 Press and release the voice key on the right side of your phone and say the entry’s name (in two seconds) 7 Press the voice key and repeat the name edit the phonebook entry scroll to Voice Name...
Dialing a Phonebook Entry You can use the phonebook list, voice dial, speed dial, or one-touch dial to call the numbers stored in your phonebook. To use speed dial, see “Dialing With Speed Dial” on page 39. To use one-touch dial, see “Dialing With One-Touch Dial” on page 40.
Editing a Phonebook Entry Find the Feature Press VIEW EDIT Edit a phonebook entry by following the procedures described in “Storing a Phonebook Entry” on page 76. Deleting a Phonebook Entry To delete a phonebook entry: Find the Feature Press SELECT Phonebook >...
Module and accessories. Phonebook > Phonebook Phonebook Menu open the scroll to Ph Book Capacity select Ph Book Capacity The phone displays the number of entries that are in use and the number that are empty. software, a Motorola accessory product. See...
Setting Up the Phonebook You can set up your phone to sort your phonebook list by speed dial number (the standard), name, or voice dial. Tip: The voice dial sort is identical to the name sort, except that the entries with voice name tags appear first. Find the Feature Press SELECT...
Datebook The datebook is a calendar that lets you schedule and organize events such as appointments and meetings. You can review your schedule of events for the week or by the day, and have the datebook play a reminder alarm for specific events. To schedule or see events: Find the Feature The datebook is organized by views —from the week view, to the...
Day View Select a day in the week view and press day’s events. You can store, edit, view, copy, and delete any event from the day view. Untimed event Alarm ¥ JoeÕs B-day 8:00 Down scroll 9:00 arrow 9:30 1:00 Return to BACK previous...
Event View Select an event in the day view and press detailed event view. You can edit, copy, and delete events from the event view. Alarm Duration Alarm time Repeat BACK Return to previous screen Datebook THU 8:00 am Marie, mtg for status (1 hrs) 10 min before None...
Storing a New Event A title is required for a datebook event. All other information is optional. Find the Feature See “Selecting a Feature Option” on page 48 for instructions on scrolling to and selecting options. Press CHANGE 2 keypad keys DONE Datebook >...
Changing Event Information To change information about an existing event: Find the Feature Press left or right VIEW VIEW EDIT CHANGE 8 keypad keys DONE Datebook Datebook > scroll to the scheduled event day display the day view scroll to the event you want to change display the event view edit the event...
Copying an Event To copy information from a current event to a new event: Find the Feature Press left or right VIEW SELECT 8 keypad keys to the right DONE DONE Datebook Datebook > scroll to the scheduled event day display the day view scroll to the event to copy open the...
Deleting an Event Find the Feature Press left or right VIEW SELECT SELECT Datebook > Datebook scroll to the scheduled event day display the day view scroll to the event to delete open the Datebook Menu Delete scroll to Delete select For non-repeating events, go to step 7.
Radio You can use your phone to tune, store presets, and listen to FM radio stations when the optional Motorola Original™ FM radio headset accessory is plugged into the phone’s accessory connector port. Turning the Radio On and Off Press Radio >...
Storing a Preset When you tune the station that you want to save: Do This Press and hold a number key Selecting a Preset To select a preset radio station: Press a number key Sending and Receiving Calls With the Radio On Your phone interrupts the radio signal and rings or vibrates as usual to notify you of an incoming call, message, or other event.
Messages—Voicemail You can listen to your voicemail messages by calling your network voicemail phone number. Voicemail messages are stored on the network—not on your phone. Contact your service provider for more details. Storing Your Voicemail Number Store your voicemail number in your phone to make it faster and easier to use voicemail.
Messages—Voicemail From the new message notification: Do This CALL Press Listening to a Voicemail Message To listen to your voicemail messages at any time: Find the Feature Your phone calls the voicemail phone number you stored. If you do not have a voicemail number stored, the phone guides you through storing a number.
Messages—Text Text messages are brief messages that you can send and receive (such as Received messages appear on your phone display or in your text message inbox. You must set up the text message inbox before you can send and receive these messages.
Messages—Text Press 6 keypad keys CHANGE SELECT left and right DONE Receiving a New Text Message Note: You must set up the text message inbox before you can receive text messages. When you receive a new message, your phone displays Message and gives an alert.
Messages—Text new message notification, read the message, or turn off your phone. (See “Reminders” on page 117.) When your inbox is full, any new message replaces the oldest unlocked message. From the new message notification: Press READ Reading, Locking, or Deleting a Text Message You can open your text message inbox to read, lock, or delete messages at any time.
Messages—Text Press SAVE DELETE Text Msg Menu Option Call Back Go To Reply Lock/Unlock Delete Delete All Store Number close the message without changes delete the message open the Text Msg Menu other procedures as described in the following list includes the following options: Description Call the number in the message header or...
Messages—Text Option Setup Sending a New Text Message To create and send a new text message: Find the Feature Press CHANGE 2 keypad keys CHANGE 5 keypad keys CHANGE 8 keypad keys Description Open a new text message form. Open the inbox setup menu. Messages >...
Messages—Text Press DONE Viewing the Status of Sent Text Messages Text messages that you send are stored in the outbox. To view the contents of your outbox: Find the Feature Messages are sorted from newest to oldest. The following icons indicate message status: á...
Shortcuts Your phone includes several pre-programmed shortcuts. You can create additional shortcuts, if you like, to mark frequently used menu items. Standard Shortcuts The following shortcuts are pre-programmed on your phone. You cannot edit or delete these shortcuts. Do This Press , then press and hold...
Creating a Shortcut You can assign a keypad shortcut, or both a keypad shortcut and a voice shortcut to a menu item. A voice shortcut lets you go directly to a menu item by saying its shortcut name. Your phone can store a total of five voice shortcuts.
Page 105
Shortcuts Do This 5 Press CHANGE Press DONE Press 6 Press RECORD change the keypad shortcut number, if necessary select the default keypad shortcut number and close the shortcut editor if you do not want to assign a voice shortcut Voice scroll to assign a voice shortcut...
Do This 7 Press and release the voice key on the right side of your phone and say the shortcut’s name (in two seconds) 8 Press and release the voice key and repeat the name 9 Press DONE Using Shortcuts You can use a shortcut from the idle display, while on a call, or while scrolling through a menu.
Use a Keypad Shortcut If you know the shortcut number: Press 2 the shortcut’s number Select a Shortcut From the List To select a shortcut from the shortcut list: Find the Feature Use a Voice Shortcut To use a voice shortcut: Do This 1 Press 2 Press and release the...
Voice Notes The voice note feature lets you record personal messages. You can play back a voice note at any time. There are no pre-recorded voice notes on your phone. Recording a Voice Note Your phone can store a total of two minutes of voice note recordings.
Page 109
Voice Notes Do This 1 Press and hold the voice key on the right side of your phone for the duration of the recording. 2 Speak your voice message into the phone. 3 Release the voice key to stop recording. Result A tone sounds in the earpiece and the phone...
Viewing the Voice Notes List The voice notes list shows all your voice notes along with other important information and features. Find the Feature Locked voice note 5)2:20pm 10/1/00 4)4:05pm 6/1/00 Down scroll 3)4:00pm 6/1/00 arrow 2)11:05am 4/1/00 1)9:00am 1/1/00 EXIT Return to previous...
Press PLAY When a Motorola Original™ headset accessory or FM radio headset accessory is attached to your phone, voice note playback is automatically routed to the headset. Tip: You can play a voice note while taking a call. It won’t be transmitted to the other party.
Page 112
Voice Note Controls While playing back a voice note, press these keys to do the following: Stop playback and go to Voice Notes Menu Stop playback and return to voice notes list. Press up/down to stop playback and scroll to next voice note.
Locking and Unlocking a Voice Note You can prevent a voice note from being accidentally deleted by locking it. To delete a locked voice note, you must first unlock it. Find the Feature Press SELECT You can also lock or unlock a voice note while playing it back. When the playback screen is displayed: Press SELECT...
Deleting a Voice Note You can delete a single unlocked voice note or all unlocked voice notes. To delete a locked voice note, you must first unlock it. See “Locking and Unlocking a Voice Note” on page 111. Find the Feature Press SELECT Notes:...
Micro-Browser The micro-browser lets you access Web pages and on your phone. Contact your service provider to set up access, if necessary. Starting a Micro-Browser Session To open the micro-browser: Find the Feature The micro-browser displays the home page set up by your service provider.
Micro-Browser Interacting With Web Pages You can perform the following operations on a Web page: Do This Press Press and then SELECT Press keypad keys and then Press to scroll to a phone number on a Web page, then press Press scroll through a text message scroll through and select items in a...
Adjusting Your Settings You can adjust a wide variety of phone settings to suit your needs. Ring/Vibrate Your phone rings or vibrates to notify you of an incoming call, message, or other event. This ring or vibration is called an alert . You can use a standard alert for all events, or set different alert types for different events.
Page 118
Adjusting Your Settings Select a Ring/Vibration for a Specific Event You can select the alert that your phone uses for a specific event (such as an incoming call) from 32 different preset tones and vibrations. When you select a ring or vibration alert for a specific event, it overrides the default alert set for all events.
Adjusting Your Settings Reminders Reminders are alerts that ring or vibrate to notify you about a voicemail or text message that you have received, or a datebook event that you have scheduled. To set or turn off reminders: Find the Feature Press SELECT Reordering Menu Items...
Adjusting Your Settings Press GRAB INSERT Customizing a Soft Key Function You can relabel the soft keys ( main menu items from the idle display. Find the Feature Press CHANGE CHANGE scroll to the menu item you want to move grab the menu item you want to move move the item up or down the menu...
Hands-Free Use Your phone includes an integrated two-way speakerphone for all hands-free applications. You can also purchase an optional Motorola Original™ hands-free car kit or headset for your phone. These accessories provide alternative ways for you to use your phone without using your hands.
Page 122
Adjusting Your Settings Press CHANGE SELECT Automatic Hands-Free You can set up your phone to automatically route calls to a car kit when it detects a connection. Find the Feature Press SELECT select Auto Answer scroll to confirm the setting >...
Page 123
Adjusting Your Settings Power-Off Delay When your phone is connected to a car kit, you can set it to stay on for a specified time period after you switch off the ignition. This keeps your phone from draining your vehicle battery by staying on indefinitely, but leaves your phone on long enough that you do not have to re-enter your unlock code when you make short stops.
Adjusting Your Settings Charger Time When your phone is connected to a car kit, you can set it to charge itself for a specified time period after you switch off the ignition. This helps ensure that the phone battery gets fully charged while the vehicle is parked.
• use your phone as a wireless modem to connect to the Internet • use your phone to send and receive data and fax calls on your computer or hand-held device. More information about Motorola Original data kits is available http://www.motorola.com/dataaccessories . Connecting Your Phone to an External Device...
Data and Fax Calls Set Up a Cable Connection Attach a serial cable or Motorola Original USB cable to the phone and external device as follows. Note: Check your computer or hand-held device to determine the type of cable you need.
Page 127
Data and Fax Calls Do This 2 With the Motorola logo and the phone both facing you, plug the detachable head into the phone’s accessory connector port. 3 Plug the other end of the cable into the serial interface connection on the external device and tighten the screws.
Data and Fax Calls Install the Software Install the software from the CD-ROM that comes with your Motorola Original data kit. See the data kit’s user guide for more information. Sending a Data or Fax Call You can connect your phone to a computer or hand-held device to send data or a fax from the connected device.
Data and Fax Calls Receiving a Data or Fax Call You can connect your phone to a computer or hand-held device to receive data or a fax. Use this feature to transfer data to your computer from another device. Set Up Your Phone Before you receive a data or fax call, you must configure your phone for the incoming call type and connect the phone to the device that will receive the call.
Data and Fax Calls Do This 4 Connect your phone to the device Note: You cannot answer incoming voice calls when your phone is in data or fax mode. Any voice calls you receive are treated as unanswered calls. You must reset your phone to voice mode to return these calls.
Page 131
Data and Fax Calls Reset Normal Voice Operation After you receive a data or fax call, you must reset your phone to resume normal voice operations. You cannot receive voice calls when your phone is in data or fax mode. Find the Feature Do This 1 Press...
Security Assigning a New Code or Password Your phone’s four-digit unlock code is originally set to 1234, and the six-digit security code is originally set to 000000 at the factory. Your service provider may reset these numbers before you receive your phone. If your service provider has not reset these numbers, we recommend that you change them to prevent other users from accessing your personal information or modifying your phone...
To change a code or password: Find the Feature Press CHANGE 3 keypad keys 5 keypad keys 7 keypad keys If You Forget a Code or Password If you forget your security code (originally set to 000000), contact your service provider. Security Settings >...
If you forget your unlock code, try entering 1234 or the last four digits of your phone number. If that does not work, do the following when you see the Press 2 keypad keys Locking and Unlocking Your Phone You can lock your phone manually or set your phone to lock automatically whenever you turn it off.
Set Your Phone to Lock Automatically You can set your phone to lock every time you turn it off: Find the Feature Press 1 keypad keys Unlock Your Phone At the Enter Unlock Code Press 1 keypad keys Security > Settings >...
Locking and Unlocking Your Keypad You can lock your phone keypad to prevent accidental use. This feature is useful in situations where an accidental keypress might inadvertently dial an emergency number or one-touch dial number (for example, when carrying your phone in a purse or pocket).
Page 137
Find the Feature Press 1 keypad keys CHANGE CHANGE SELECT Tip: The phonebook application is not locked when you restrict calls to numbers stored in the phonebook. To prevent a user from adding (and then calling) a new phonebook entry, you may want to lock the phonebook application under these circumstances.
Troubleshooting Check these questions first if you have problems with your phone: Question Is your phone set up correctly? Is your battery charged? Do you in the display? Does the handset have a signal? Do you see the display? Is the earpiece volume too low? Answer Press...
Page 139
Dropping your phone, getting it wet, or using a non-Motorola battery or battery charger can damage the phone. The phone’s limited warranty does not cover liquid damage or damage caused from using non-Motorola accessories.
Page 140
Troubleshooting Problem I pressed the power key, but nothing happened. The display says: Enter Unlock Code . How do I unlock my phone? My phone asks for an unlock code when I try to open a feature. My phone does not ring.
Page 141
Troubleshooting Problem I cannot send/ receive calls. My phone has poor reception and drops calls. I cannot hear others on my phone. Solution Make sure that your antenna is fully extended and that you have a phone signal (see the “Signal Strength Indicator”...
Page 142
Troubleshooting Problem I cannot open my inbox. How do I see the calls I sent or received? My phone will not send voicemail commands, passwords, or other codes. Solution Before you can use text or information services messages, you must set up the appropriate inbox.
Page 143
Troubleshooting Problem My phone’s display is too dark. My battery didn’t last as long as I expected. What can I do to extend battery life? I am unable to record a voice note, voice name, or voice shortcut Solution You can use the Contrast Setting feature (see page 62) to change the level of contrast in your phone display.
Page 144
Troubleshooting Problem I plugged the data cable into my phone but my phone did not beep. How do I know if the data cable is ready to My phone beeped when I attached the data cable, but my fax and data applications don’t work.
Page 145
Troubleshooting Problem When sending data with the data cable, why does the computer show a connection rate of 19200 Kbps? I can’t end my data call by closing the application on my computer. What can I do? I launched the micro-browser but the display Service Not...
Programming Instructions Follow this procedure if you need to program your phone’s phone number or system ID. Note: Programming is normally done by a trained technician at the site of purchase. Users should not make changes other than ones in the following procedure. Before programming, ask your service provider for your: •...
Page 147
Programming Instructions Do This 7 4 6 6 3 1 Press # M M (These keys spell P-H-O-N-E # M M 2 Press SELECT 3 Press the keypad keys for the 10-digit MIN 4 Press 5 Similarly, enter appropriate numbers for the IMSI, MDN, AMPS SysID, and CDMA SysID DONE 6 Press...
Specific Absorption Rate Data This model phone meets the government’s requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.
Page 149
2. The SAR information reported to the FCC includes the FCC-accepted Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product. , and when worn on...
The U.S. Food and Drug Administration's Center for Devices and Radiological Health Consumer Update on Mobile Phones FDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is known—and what remains unknown— about whether these products can pose a hazard to health, and what can be done to minimize any potential risk.
Page 151
What kinds of phones are in question? Questions have been raised about hand-held mobile phones, the kind that have a built-in antenna that is positioned close to the user's head during normal telephone conversation. These types of mobile phones are of concern because of the short distance between the phone's antenna—the primary source of the RF—...
Page 152
obtained from animal studies apply to the use of mobile phones. First, it is uncertain how to apply the results obtained in rats and mice to humans. Second, many of the studies that showed increased tumor development used animals that had already been treated with cancer-causing chemicals, and other studies exposed the animals to the RF virtually continuously—up to 22 hours per day.
Page 153
The cells in this assay showed changes after exposure to simulated cell phone radiation, but only after 24 hours of exposure. It is possible that exposing the test cells to radiation for this long resulted in heating. Since this assay is known to be sensitive to heating, heat alone could have caused the abnormalities to occur.
Page 154
performed cognitive function tests. There were no changes in the subjects' ability to recall words, numbers, or pictures, or in their spatial memory, but they were able to make choices more quickly in one visual test when they were exposed to simulated mobile phone signals. This was the only change noted among more than 20 variables compared.
Page 155
population at a rate of about 6 new cases per 100,000 people each year. At that rate, assuming 80 million users of mobile phones (a number increasing at a rate of about 1 million per month), about 4800 cases of brain cancer would be expected each year among those 80 million people, whether or not they used their phones.
Page 156
Although the existing scientific data do not justify FDA regulatory actions at this time, FDA has urged the mobile phone industry to take a number of steps to assure public safety. The agency has recommended that the industry: • support needed research into possible biological effects of RF of the type emitted by mobile phones •...
Page 157
are concerned about avoiding even potential risks, there are simple steps they can take to do so. For example, time is a key factor in how much exposure a person receives. Those persons who spend long periods of time on their hand-held mobile phones could consider holding lengthy conversations on conventional phones and reserving the hand-held models for shorter conversations or for situations when other types of...
Page 158
Federal Communications Commission (FCC) RF Safety Program (select “Information on Human Exposure to RF Fields from Cellular and PCS Radio Transmitters”): http://www.fcc.gov/oet/rfsafety World Health Organization (WHO) International Commission on Non-Ionizing Radiation Protection (select Qs & As): http://www.who.int/emf United Kingdom, National Radiological Protection Board: http://www.nrpb.org.uk Cellular Telecommunications Industry Association (CTIA): http://www.wow-com.com...
Motorola (Products). • Batteries. Defects in materials and workmanship in batteries that are manufactured by Motorola and/or sold with Products are covered by this warranty only if the fully- charged capacity falls below 80% of rated capacity or they leak.
Page 160
II. What the Period of Coverage Is From the date the Products are purchased by the first end-user: • Products. The warranty is for one year. Exception: The warranty for Spirit GT series and Talkabout series two-way radio accessories is for 90 days. •...
Page 161
TTY (Text Telephone) 1-888-390-6456 You will receive instructions on how to ship the Products to Motorola. You must ship the Products to us with freight, duties and insurance prepaid. Along with the Products you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase;...
Page 162
• Someone other than Motorola (or its authorized service centers) tests, adjusts, installs, maintains, alters, modifies or services the Products in any way. Any of these voids the warranty. • Rechargeable batteries that: (a) are charged by other than the Motorola-approved battery charger specified for charging such batteries;...
Page 163
Products, etc. VII. Some Other Limitations This is Motorola’s complete warranty for the Products, and states your exclusive remedies. This warranty is given in lieu of all other express warranties. Implied warranties, including without limitation, the implied warranties of merchantability and fitness for a...
Page 164
VIII. Patent and Software Provisions At Motorola’s expense, we will defend you, and pay costs and damages that may be finally awarded against you, to the extent that a lawsuit is based on a claim that the Products directly infringe a United States patent.
Page 165
Warranty Motorola will have no liability to you with respect to any claim of patent infringement that is based upon the combination of the Products or parts furnished under this limited warranty with ancillary equipment, as defined in VI., above.
Page 166
Paging Two-Way TTY (Text Telephone) 1-888-390-6456 Canada All Products TTY (Text Telephone) 1-888-390-6456 To correspond with Motorola about the Products, please write us at http://www.motorola.com or at: In the USA: Motorola, Inc. 600 North U.S. Highway 45 Libertyville, IL 60048...
Patent Information Manufactured under one or more of the following U.S. patents: 4291475 4616314 4302845 4617520 4312074 4628529 4365221 4629829 4369516 4633141 4369520 4636593 4369522 4636741 4374370 4648125 4378603 4649543 4390963 4654655 4398265 4680787 4400584 4704588 4400585 4711361 4434461 4715063 4455534 4717884 4486624...
Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations.
Page 181
predictive text entry (continued) deleting text 58 entering numbers 57 entering words 54–56 punctuation 56 quick dial setting number 64 using 65 quick note 61 radio 65, 91–92 received calls list 43, 66, 69–71 receiving a call 27 recent calls 69–71 adding digits after phone number 71 attaching phone number to...
Page 182
shortcuts creating 102–104 standard 101 using 104–105 signal strength indicator defined 29 illustration 29 silent alert indicator 30, 115 SMS. See text message soft keys customizing 64, 118 functions 47 illustration 5 soft ring alert 30, 115 speaker key 46 speakerphone 5, 33, 46 speakerphone key 5, 33 speed dial...
Page 183
unlock keypad 134 phone 132–133 unlock code 132 vibrate alert indicator 30, 115 muting 38 setting 115 type, selecting 116 voice dial dialing a number 43, 80 recording voice name 78–79 voice key dialing a number 43 functions 5 recording a voice name 79 recording a voice note 106–107 voice message waiting...
1 Get to know your Motorola wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.
Page 186
3 Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.
Page 187
9 Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.* 10 Call roadside assistance or a special non-emergency wireless assistance number when necessary.
Page 188
Check the laws and regulations on the use of wireless telephones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. For more information, please call 1-888-901-SAFE or visit the CTIA Web site at...