Fuji Xerox ApeosPort-IV C5575 Administration Manual page 491

Error Code
010-330
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
010-371
[Cause] An error occurred in the machine.
010-372
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
010-373
on the machine power. If the same message is displayed again, contact our Customer
010-374 Support Center.
010-375
010-376
010-377
010-378
010-379
010-380
010-381
010-382
010-398
012-210
[Cause] Finisher malfunction
012-211
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
012-212
on the machine power. If the error still is not resolved, contact our Customer Support
012-213 Center.
012-221
012-223
012-224
012-225
012-226
012-227
012-228
012-229
012-230
012-231
012-232
012-233
012-234
012-241
012-243
012-246 [Cause] The Booklet Maker is not fully inserted completely into the Finisher.
[Remedy] Completely insert the Booklet Maker into the Finisher, and turn the machine off and
then on.
012-247 [Cause] Finisher malfunction
012-249
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
012-255 [Cause] Finisher Tray malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
Cause and Remedy
Error Code
15
491