Engine Identification; Initial Receipt Of The Engine; Engine Storage - Beta Marine Beta 10 Operator's Maintenance Manual

ENGINE IDENTIFICATION

IMPORTANT!
number and or the engine serial number in all communications concerning your engine
1 Beta Marine WOC Number
BETA 10, BETA 14, BETA 16, BETA 20 & BETA 25
3 Engine Serial Number

INITIAL RECEIPT OF THE ENGINE

A full inspection of the engine must be made immediately on delivery to confirm that there is no damage. If there is
any damage then write this clearly on the delivery note and inform your dealer or Beta Marine within 24 hours. A
photograph would always help.

ENGINE STORAGE

The engine must be stored in a dry, frost free area and this is best done in its packing case. If storage is to be more
than six months then the engine must be inhibited (contact your dealer or Beta Marine). Failure to inhibit the engine
may result in the formation of rust in the injection system and the engine bores, this could invalidate the warranty.
- We are asking you to always provide the WOC (Works Order Card)
2
The engine serial number is shown on the rocker cover
label. It is also stamped on the crank case flange below
the fuel injection pump on the starboard side of the
engine.
4