Electrical Connections; Wiring Diagram - Panasonic CQ-DVR592U Operating Instructions Manual

Electrical Connections

Wiring Diagram

E
N
G
Example Combination
L
≥Color LCD Monitor
Not used.
I
(CY-VMX6800U, option)
S
H
(Green/Yellow Stripe)
53
Changer control cord
Accessories used for wiring
No. Item
6
Power Connector
Motor antenna relay control lead
(To motor antenna) (Max. 0.1 A)
This lead is not intended for use with switch actuated power antenna.
Note:
The power antenna extends automatically when the AM/
≥
FM radio mode is selected.
Not used
Note:
Insulate this lead with vinyl tape .
≥
External amplifier control lead
(Max. 0.1 A)
This lead is for connection to the power amplifier.
Note:
This lead is used for power control when an external power
≥
amplifier is connected. The power supply of a power amplifier
will be activated when turning on the power of this unit.
Not used.
Note:
Insulate this lead with vinyl tape .
≥
Side brake (parking brake)
connection lead
Be sure to wire the side brake (parking brake) for
safety and preventing accidents. ( page 70)
ACC power lead
To ACC power, _12 V DC.
Battery lead
To the battery, continuous _12 V DC.
Ground lead
To a clean, bare metallic part of the car chassis.
68
CQ-DVR592U
VIDEO-CONT
CQ-DVR592U
Q'ty
1
OPTICAL OUT
Radio antenna input 6 Power connector
ANT-CONT MAX0.1A
(Dark Blue)
( TWIN CD C-CONT )
•
(Brown/White Stripe)
AMP-CONT MAX0.1A
(Blue/White Stripe)
NAVI MUTE
(Orange)
PARKING BRAKE
(Blue/Yellow Stripe)
Resistor (1 kΩ)
ACC
(Red)
BATTERY 15 A
(Yellow)
Fuse (15 A)
(Black)
Video (Yellow)
VIDEO OUTPUT Cord
VIDEO-OUT
R (Red)
REAR AUDIO OUT Cord
L (White)
REAR AUDIO-OUT
Connect this cord when the monitor
is to be installed on the back seat.
FRONT
PRE OUT Cord (Front)
REAR
PRE OUT Cord (Rear)
.
S W-OUT
Subwoofer Cord
AUX-IN
AUX-INPUT Cord
CD.C-IN
CD CHANGER INPUT Cord
Speaker Lead
FRONT R
Speaker Lead
FRONT L
Speaker Lead
REAR R
Speaker Lead
REAR L
Caution:
≥ This product is designed to operate with a 12 V DC, negative ground battery system.
≥ To prevent damage to the unit, be sure to follow the connection diagram below.
≥ Remove approx. 1 ⁄ z (5 mm) of protective covering from the ends of the leads before connecting.
4
≥ Do not insert the power connector into the unit until the wiring is completed.
≥ Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all
cables and keep cable terminals free from touching any metal parts.
≥ Remember, if your car has a drive computer or a navigation computer, the data of its memory may
be erased when the battery terminals are disconnected.
≥ The remote control unit does not work when it is facing the remote control sensor on the connected monitor.
RCA Cord
Video (Yellow)
(option)
R (Red)
RCA Cord (option)
L (White)
Video (Yellow)
R (Red)
R (Red)
L (White)
L (White)
R (Red)
L (White)
L (White)
R (Red)
(Red)
(Monaural)
Video (Yellow)
(White)
CY-VMX6800U
VTR1
(option)
R (Red)
input lead
Power socket
L (White)
R (Red)
Power connector
L (White)
(Gray)
+
(R)
(Gray/Black Stripe)
-
To
(White)
+
Front Speaker
(L)
(White/Black Stripe)
-
(Violet)
+
(R)
(Violet/Black Stripe)
-
To
(Green)
+ Rear Speaker
(L)
(Green/Black Stripe)
-
CQ-DVR592U
E
N
G
L
I
S
H
54
69