Table of Contents
Advertisement
ZS100
picture
[Multi Exp.]
Recording mode:
You can create an effect similar to the operation of up to four times of exposure on a
single picture.
1
Set the menu
→
2
Press
3
Decide on your composition and take the
first picture
• After recording the first picture, press the shutter
button halfway to proceed to the next recording.
• Press
You can perform the following operations.
– [Next]: Proceed to the next recording.
– [Retake]: Delete the result of the last shot and take
– [Exit]: Exit Multi Exposure and save the picture that
4
Record the second, third, and fourth
pictures
• When you press [Fn1] button while taking pictures, the
pictures that you took are saved and Multi Exposure
is closed.
5
Press
[MENU/SET]
• You can also end the operation by pressing the shutter
button halfway.
223
Performing multiple exposures for a single
[Rec] → [Multi Exp.]
to select [Start] and press [MENU/SET]
to select the item and press [MENU/SET].
another picture.
was taken.
to select [Exit] and press
Functions for specific subjects and purposes
Next
Retake
Exit
Retake
Exit
SQW0547
- Quick Links:
- Changing Flash Mode
- Wi-Fi Setup
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the LUMIX DMC-ZS100 and is the answer not in the manual?
Questions and answers
My trusty Panasonic LUMIX DMC-ZS100 with flash seems To have problems. I am afraid to touch it. I took a picture with flash and sparks came out! I took a second shot and bigger spark. I need my camera by mid April! What can I do from Vancouver, Canada?
If your Panasonic LUMIX DMC-ZS100 camera is sparking when using the flash, stop using the camera immediately. Sparking indicates a possible electrical fault, which can be dangerous. Do not attempt to repair it yourself. Disconnect the battery and contact a qualified service technician or authorized Panasonic service center for inspection and repair.
This answer is automatically generated