Packet Statistics - ZyXEL Communications PLA4231 User Manual

Chapter 9 Monitor
The following table describes the labels in this screen.
Table 14 Monitor > Log
LABEL
Display
Refresh
Clear
#
Time
Message
You can configure which logs to display in the View Log screen. Go to the Log Setting screen and
select the logs you wish to display. Click Apply to save your settings. Click Cancel to start the
screen afresh.
Figure 41 Monitor > Log Setting

9.4 Packet Statistics

Click the Packet Statistics (Details...) hyperlink in the Dashboard screen or Monitor > Packet
Statistics. Read-only information here includes port status, packet specific statistics and the
"system up time". The Poll Interval(s) field is configurable and is used for refreshing the screen.
Figure 42 Monitor > Packet Statistics
60
DESCRIPTION
Select what logs you want to see from the Display drop list. The log choices depend on
your settings in the Log Setting screen.
Click Refresh to renew the log screen.
Click Clear to delete all the logs.
This field is a sequential value and is not associated with a specific entry.
This field displays the time the log was recorded.
This field states the reason for the log.
PLA4231 User's Guide