ZyXEL Communications PLA4231 Quick Start Manual

500 mbps powerline wireless n extender kit

Hide thumbs Also See for PLA4231:

Room 1

Connect the Ethernet port of one powerline adapter (PLA4201 v2 for example) to your broadband

router/ modem's LAN port .

Plug the PLA into a power outlet

Room 2

Plug the PLA powerline extender (PLA4231) into a power outlet.

Push the power button.

Ensure that the LED's are on. Make note that the HomePlug LED color will display the data rate between the

powerline adapters. Green is higher than 80 Mbps. Orange is between 20 and 80 Mbps. Orange is between

20 and 80 Mbps. Red is between 0 and 20 Mbps.

See the User's Guide for more information.

SSID = ZyXEL

Wi-Fi Key: Your default WiFi security

key is the same as the 12 digit MAC

addresses located on the belly

sticker on your PLA4231. Letters

should be entered as capitals.

Package Contents

Ethernet x 2

Quick Start

Guide

Table of Contents

Do you have a question about the PLA4231 and is the answer not in the manual?

Page 1 PLA4231. Letters should be entered as capitals. Plug the PLA powerline extender (PLA4231) into a power outlet. Push the power button. Ensure that the LED’s are on. Make note that the HomePlug LED color will display the data rate between the powerline adapters.
Page 2 ZyXEL provides support to our customers via our toll free telephone number and our website. If you need further assistance, please contact your ZyXEL Support Team at 1-800-978-7222. To register the product online: http://zyxel.us/registration ZyXEL Communications Inc. http://www.zyxel.us/support www.zyxel.com/us 1-800-978-7222 support@zyxel.com See the User's Guide for more information. Copyright © 2015 ZyXEL Communications Corp. All Rights Reserved...

Pla4201v2