Table of Contents
Advertisement
You can adapt the programming of the
cooktop to your personal needs. Sever‐
al settings can be changed in succes‐
sion.
After the programming function is start‐
ed, (program) and (status) will ap‐
pear in the timer display. With cooktops
that have 3 cooking zones, an addition‐
al display appears at the back left.
The program is displayed in the front
left and back left cooking zone dis‐
plays.
Example:
Program 03 =
Front left , rear left
Program 14 =
Front left , rear left
The status is shown in the front right
cooking zone display.
After the programming function is exit‐
ed, an automatic reset is performed. It
is concluded when an indicator light
lights up briefly via the sensor but‐
ton.
Do not turn on the cooking zone until
the reset is concluded.
Starting the programming
function
When the cooking zone is turned
off, tap the and sensor buttons
simultaneously until the indicator light
for the safety lock flashes.
Setting a program
To set the ones, touch the sensor for
the back left cooking zone followed
by the respective number on the set‐
tings bar.
To set the tens, touch the sensor for
the front left cooking zone followed
by the respective number on the set‐
tings bar.
Setting the status
Touch the sensor for the front right
cooking zone followed by the respec‐
tive number on the settings bar.
Saving the settings
Touch the sensor until the indica‐
tors go out.
How to avoid saving the set‐
tings
Touch the sensor until the indica‐
tors go out.
Programming
41
Hide quick links:
Advertisement
Table of Contents
