Table of Contents
Advertisement
Operation
Fire hazard!
Do not leave the cooktop unattended
during operation!
Please note that the heat-up time for
induction cooktops is shorter than
for conventional cooktops.
Turning the cooktop On
Tap the sensor button.
appears in each of the cooking zone
indicators. If no further entry is made,
the cooktop will turn itself off after a
few seconds for safety reasons.
Selecting/Changing the power
level
Briefly tap the selection button for the
desired cooking zone.
In the cooking zone indicator, will
flash alternately with the selected pow‐
er level.
Tap the sensor button for the desired
power level on the corresponding
control scale.
The set power level flashes in the indi‐
cator for a few seconds and then lights
up constantly.
Deactivating
Briefly tap the selection button of the
desired cooking zone twice to turn off
the zone.
To turn off the cooktop and thus all
cooking zones, tap the sensor
button.
26
Residual heat indicator
When a cooking zone is hot, the residu‐
al heat indicator will light up after deac‐
tivation.
The lines of the residual heat indicator
go out one after another as the cooking
zone cools down. The last horizontal
line only goes out when the cooking
zone is safe to touch.
The residual heat indicators will flash if
there is a power cut during use or
while residual heat is still present or if
you have opened the programming
function while residual heat is still
present.
Risk of burns! Do not touch the
burners while the residual heat indi‐
cators are on.
Hide quick links:
Advertisement
Table of Contents
