Table of Contents
Advertisement
CLEAnInG VACUUM InLET COVER
1 Turn off the power switch and turn the robot
upside down.
2 Remove vacuum inlet cover as shown in the
illustration.
3 Clean vacuum inlet cover and the fan mechanism
to ensure good ventilation.
4 Reinsert the vacuum inlet cover by guiding the
hinge tabs back into the holes carefully.
REPLACInG sIDE BRUsH
1 Use a cross-head screwdriver to remove side brush cover.
2 Insert new side brush and put back the cover.
3 Tighten the screws.
1
For further help, technical advice, or to order spare or replacement parts
please contact Vileda in the UK on 0845 769 7356.
14
2
2
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Cleaning Robot M-488A and is the answer not in the manual?
Questions and answers