Related Manuals for Vileda VR 302
Summary of Contents for Vileda VR 302
- Page 1 Robot VR 302 User & care guide • Manuale dell'Utilizzatore • Bedienungs- und Pflegeanleitung• Manual del usuario • Manual do Utilizador Manuel de l'Utilisateur • Gebruikershandleiding • Kullanıcı Kılavuzu...
-
Page 2: Table Of Contents
Thank you for chosing our new Vileda VR 302 robotic vacuum cleaner. VR 302 will become your reliable partner for daily cleaning, helping remove the dirt, dust and hair so you don’t have to. Contents Quick Start Guide 1. General Warnings 2. -
Page 3: General Warnings
1. General Warnings IMPORTANT: Read all instructions before use. Retain instructions for future reference. WARNING: Use the Robot only as described in this manual. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. When using any electrical Robot, basic safety precautions should always be observed, including the following, in order to reduce the risk of fire, electrical shock, leaking batteries or... - Page 4 PERSONAL SAFETY: • The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this Robot other than those recommended in this instruction manual may present a risk of personal injury. •...
- Page 5 • Do not abuse the charger cord; never carry the charger by the cord. • Do not over-bend the power cord or pressure the power cord with heavy or sharp objects. • Never pull the charger cord to disconnect from a socket; grasp the charger and pull to disconnect.
- Page 6 • WARNING: If the battery is damaged in any way, do not attempt to recharge it. Contact Vileda customer service address (see last page). • Charge the battery for 5 hours before first use. After the first use, charging time is about 4-5 hours.
-
Page 7: Getting To Know Vr 302
2. Getting to know VR 302 2.1 CONTENT Package Contents: 1. Robot Main Body 2. Docking Station 3. Charger Cable + Adaptor 4. Remote Control incl. 2 Batteries 5. 2 Sidebrushes (left + right, marked by “L” and “R” on the sidebrushes) 6. - Page 8 LED DISPLAY 1. LED panel, it shows the time, time setting and common error codes by using numbers, letters or graphs. The overview for the different commands can be found on page 12. 2. Battery Indiciation 3. MAX mode button / Increase number when scheduling cleaning or setting the time.
-
Page 9: Product Operation
DOCKING STATION 1. Power indicator 2. Charging socket 3. Charging poles REMOTE CONTROL 1. Power button / ON-OFF 2. Arrow keys for navigation of the robot 3. MAX mode button 4. Spot mode button 5. Cleaning mode button 6. Home / Auto charging button •... -
Page 10: Battery Charging & Recharging
3.1 Battery charging & recharging CHARGING BATTERY: 1. Placement of docking station Place the docking station against the wall and remove obstacles about 1 meter at two sides and about 2 meters in front of the docking station. 2. If the robot is powered off, switch on the robot by pressing the power switch at the right side of the robot. -
Page 11: Turning On And Off
1. STARTING UP To turn your VR 302 on, switch the ON/OFF button on the right side of the device. You will hear a welcome melo- dy and the LED display will be illuminated. To start the standard or intensive cleaning cycle press the “POWER” or “MAX”... -
Page 12: Scheduling
THE ROBOT IS EQUIPPED WITH THREE DIFFERENT MOVEMENT PATTERNS: Automatic In this mode, the robot will clean the area automatically and adjust its cleaning behavior based on specific situations. Spiral cleaning mode 2. In this mode, robot takes the starting point as the center, then turns outward in a spiral action, suitable for an open area. -
Page 13: Maintenance
The programed time will remain saved even when switching the device off. 4. Maintenance TIPS FOR BEST PERFORMANCE To keep your Vileda robot at the best level of performance, it is recommended to maintain the robot regularly. Robot Part Care Frequency... - Page 14 • Do not dry the filters under intense sunlight directly • Don’t wash the high efficiency filter under water • Spare parts can be bought separately. Further information can be found at the Vileda service or on the Vileda website...
-
Page 15: Cleaning Main Brush And Sidebrushes
4.2 Cleaning main brush and sidebrushes CLEANING OF SIDEBRUSHES Check the sidebrushes after every use and remove dust and dirt stuck to the sidebrushes. Maximum life span for sidebrush is 6 -12 months. NOTE: Before replacing sidebrushes, please pay attention to the left mark and the right mark on sidebrushes, which match with the ‘L’/ ‘R’... -
Page 16: Cleaning Sensors And Wheels
4.5 Battery Removal In case you want to replace the battery of VR 302, please make sure you use only a battery provided by the manufacturer. 1. Make sure the device is switched off at the main switch. -
Page 17: Troubleshooting
If above described solutions do not work, please try switching off VR 302, switch it on and check again. For further help, technical advice, or to order spare or replacement parts contact Vileda (address see... -
Page 18: Environmental And Product Recycling
1. By this Guarantee, Vileda guarantees the product to be free from defects in materials and workmanship at the date of original purchase for a period of two years from that date. The Vileda company that provides and will honour this Guarantee is designated in this Guarantee or accompanying leaflets or can be found on our website www.vileda.com. -
Page 19: Vileda Product Guarantee
2. Vileda does not take responsibility for secondary or indirect damages caused by the incorrect use of the product. Save as set out elsewhere in this clause the responsibility of Vileda will not exceed the purchase price of the product. If you have any doubts referring to the correct use of the product or referring to the guarantee, call Vileda Customer Service. - Page 20 FHP Export GmbH 69448 Weinheim 06447-20-26-414 pt1/V1...
Need help?
Do you have a question about the VR 302 and is the answer not in the manual?
Questions and answers