Table of Contents
Advertisement
BIOS
The following is a description of the tabs found on the InsydeH20
screen:
NOTE:
Information
The Information tab shows a summary of computer hardware information.
Table 2-1 describes the parameters shown in Figure 2-1
Table 2-1. BIOS Information
Parameter
CPU Type
CPU Speed
HDD Model Name
HDD Serial Number
System BIOS Version
VGA BIOS Version
Serial Number
2-4
Downloaded from
www.Manualslib.com
NOTE:
The screens provided are for reference only. Actual values may differ by
model.
Figure 2-1. BIOS Information
CPU (central processing unit) type and speed of system
Speed of the CPU
Model name of HDD (hard disk drive) installed on primary IDE
master
Serial number of HDD installed on primary IDE master
System BIOS version
VGA (video graphics array) firmware version of system
Serial number of unit
manuals search engine
BIOS Setup Utility
Description
System Utilities
0
0
- Quick Links:
- System Memory
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Aspire One D270 and is the answer not in the manual?
Questions and answers
Забыл пороль биоса и системы
To reset the BIOS and system password on the Acer Aspire One D270, follow these steps:
1. Clearing BIOS Password:
- The BIOS password (Supervisor Password and User Password) is required during system POST or when entering the BIOS Setup menu.
- The system provides a software utility for clearing the password.
2. BIOS Recovery Procedure:
- There is a hotkey method for enabling BIOS recovery.
- If the password needs to be bypassed, use the provided recovery method.
3. Alternative Method Using Default Password:
- Some Acer laptops have a default BIOS password like "76 52 5080."
- Enter the default password if prompted.
- Navigate to Security in BIOS, select Set Supervisor Password, and enter the default password.
- Leave the new password fields blank to remove the password.
- Save changes and exit BIOS.
After performing these steps, the BIOS password should be cleared, and the system will no longer ask for it during startup.
This answer is automatically generated