Table of Contents
Advertisement
BIOS Flash Utilities
BIOS Flash memory updates are required for the following conditions:
Use the Flash utility to update the system BIOS Flash ROM.
NOTE:
NOTE:
NOTE:
Perform the following to run Flash.
1. Prepare a bootable USB HDD.
2. Copy
3. Boot system from bootable USB HDD.
NOTE:
2-14
Downloaded from
www.Manualslib.com
New versions of system programs
New features or options
Restore a BIOS when it becomes corrupted.
NOTE:
If a Crisis Recovery Disc is not available, create one before Flash utility is
used.
NOTE:
Do not install memory related drivers (XMS, EMS, DPMI) when Flash is
used.
NOTE:
Use AC adaptor power supply when running Flash utility. If battery pack
does not contain power to finish loading BIOS Flash, do not boot system.
Flash Utility
to bootable USB HDD.
NOTE:
Flash Utility has auto execution function.
manuals search engine
0
System Utilities
- Quick Links:
- System Memory
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Aspire One D270 and is the answer not in the manual?
Questions and answers
Забыл пороль биоса и системы
To reset the BIOS and system password on the Acer Aspire One D270, follow these steps:
1. Clearing BIOS Password:
- The BIOS password (Supervisor Password and User Password) is required during system POST or when entering the BIOS Setup menu.
- The system provides a software utility for clearing the password.
2. BIOS Recovery Procedure:
- There is a hotkey method for enabling BIOS recovery.
- If the password needs to be bypassed, use the provided recovery method.
3. Alternative Method Using Default Password:
- Some Acer laptops have a default BIOS password like "76 52 5080."
- Enter the default password if prompted.
- Navigate to Security in BIOS, select Set Supervisor Password, and enter the default password.
- Leave the new password fields blank to remove the password.
- Save changes and exit BIOS.
After performing these steps, the BIOS password should be cleared, and the system will no longer ask for it during startup.
This answer is automatically generated