(3)
Take off the equipment from the PFU.
P.2-30 "[G-1] When PFP is not installed"
(4)
Take off the PFP drawer.
(5)
Remove 1 screw and take off 1 fixing bracket
on the front left side.
(6)
Remove 1 screw and take off 1 fixing bracket
on the front right side.
(7)
Remove 1 screw and take off 1 fixing bracket
on the rear left side.
e-STUDIO182/212/242
OUTLINE OF THE MACHINE
© 2009 TOSHIBA TEC CORPORATION All rights reserved
2 - 34
Fig. 2-58
Fig. 2-59
Fig. 2-60
Fig. 2-61