Fujitsu CREMSON MODULAR STARTERKIT User Manual page 36

Problem
The windows of the debugger are
empty.
When trying to program the
application to the embedded flash, the
programmer stops at first address with
"loading error" !
Hardware units such as LEDs, user
buttons, UART0 or CAN are not
working.
CAN devices do not respond
Table 8: Trouble Shooting
For more information see the Softune Workbench on-line help, the provided manuals, last
minute information and additional or updated documentation on our web-site.
Cremson Starterkit User Manual
Chapter 7 . Appendix
Solution
* This is due to a wrong (maybe old) path
information. Closing all windows in the
debugger should fix the problem.
* You are probably trying to program a
program to the flash which is linked for the
external RAM area. See Appendix for details
on the linker settings.
∗ Make sure you have enabled these units on
the evaluation board using the appropriate
jumpers (e.g. JP25 for LEDs). See the
provided examples and the hardware manual
for information on how to control the
peripherals.
∗ Adjust the potentiometer RV2 (slew rate)
according to the line.
- 36 - © Fujitsu Microelectronics Europe GmbH