Table of Contents
Advertisement
Available languages
Available languages
Programming Your Remote, cont.
Auto Code Search
The Auto Code Search, searches automatically
through all of the codes stored in this remote. Read
all the following steps prior to starting the auto code
search as you will need to be prepared to lock-in the
proper code when found.
1. Manually turn on the device you wish
to control.
2. Press and hold the SETUP button
until the red indicator light stays on
(approximately 2 seconds) and then
release the button.
3. Press and release the device button on
the remote (TV, DVR, CBL, B-RAY, AMP,
AUX) for device you wish to control.
The red indicator will blink once and
then remain on.
4. Point the remote at the device and
press and release the POWER button
(for TV) or PLAY button (for DVD, VCR,
etc.) to start the search. The red
indicator will flash (approximately
every 2 seconds) as the remote
searches. Note: The remote must be
pointed at the device for the duration
of this search.
5. Place your finger on the #1 button so
you are prepared to lock-in the code.
6. When the device shuts off or begins
playing, press the #1 button to lock-in
the code. The red indicator light will
turn off. Note: You have approximately
two seconds after the device shuts off
or begins playing to lock-in the code.
7. Point the remote at the device and
check to see if the remote operates the
device as desired. If it does, no further
programming is required for that
device. If it does not, return to step 2
and start the auto code
search again.
8
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the 24922 and is the answer not in the manual?
Questions and answers
What is the code list for this remote
@Melissa Dennard
@Melissa Dennard I have a rca tv
I'm having trouble getting my insignia tv to work with .y ge remote
To program your GE Universal Remote (part number 24922) to work with your Insignia TV, follow these steps:
### Method 1: Direct Code Entry
1. Locate the Code: Find the correct code for Insignia in the remote's manual.
2. Turn on the TV.
3. Press and hold the "Setup" button until the red indicator light stays on, then release.
4. Press the "TV" button. The red light should blink once and remain on.
5. Enter the code using the number buttons. The red light should turn off.
6. Test the remote by pressing the power button. If the TV turns off, the setup is complete. If not, try another code.
### Method 2: Auto Code Search
1. Turn on the TV.
2. Press and hold the "Setup" button until the red light stays on, then release.
3. Press the "TV" button.
4. Press and release the "Power" button repeatedly (waiting a few seconds between presses) until the TV turns off.
5. Press "Enter" or "Setup" to save the code.
Your remote should now control your Insignia TV. If it doesn’t work, repeat the process with a different code.
This answer is automatically generated