Table of Contents
Advertisement
Available languages
Available languages
Programming Your Remote
Your GE universal remote control is designed to
control multiple audio/video devices such as a TV,
DVD, DVR, satellite, cable and audio device using
only one remote. To use this remote, you will need to
program it to control the devices of your choice. There
are two ways to program the remote - direct code
entry or auto code search.
Direct Code Entry (Recommended)
1. Locate the Remote Code List provided
in this manual. Find the DEVICE
CATEGORY you wish to program (for
example TV, DVR, CBL, B-RAY, AMP,
AUX) and then find the BRAND of that
device. Circle all the codes under that
brand. Example: For a GE TV, locate the
TV code section then circle all of the
GE TV codes.
2. Manually turn on the device you wish
to control.
3. Press and hold the SETUP button
until the red indicator light stays on
(approximately 2 seconds) and then
release the SETUP button.
4. Press and release the device button on
the remote (TV, DVR, CBL, B-RAY, AMP,
AUX). The red indicator will blink once
and then remain on.
5. Enter the first 4-digit code previously
found in the code list using the
number buttons on the remote. If the
code entered is a valid code, the red
indicator light will turn off. If the code
entered is not a valid code, the red
indicator light will flash and remain on
allowing you to re-enter the code.
Note: If no buttons are pressed for 35
seconds, the remote will exit the SETUP
mode and you will have to start over.
6
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the 24922 and is the answer not in the manual?
Questions and answers
What is the code list for this remote
@Melissa Dennard
@Melissa Dennard I have a rca tv
I'm having trouble getting my insignia tv to work with .y ge remote
To program your GE Universal Remote (part number 24922) to work with your Insignia TV, follow these steps:
### Method 1: Direct Code Entry
1. Locate the Code: Find the correct code for Insignia in the remote's manual.
2. Turn on the TV.
3. Press and hold the "Setup" button until the red indicator light stays on, then release.
4. Press the "TV" button. The red light should blink once and remain on.
5. Enter the code using the number buttons. The red light should turn off.
6. Test the remote by pressing the power button. If the TV turns off, the setup is complete. If not, try another code.
### Method 2: Auto Code Search
1. Turn on the TV.
2. Press and hold the "Setup" button until the red light stays on, then release.
3. Press the "TV" button.
4. Press and release the "Power" button repeatedly (waiting a few seconds between presses) until the TV turns off.
5. Press "Enter" or "Setup" to save the code.
Your remote should now control your Insignia TV. If it doesn’t work, repeat the process with a different code.
This answer is automatically generated