Operation - Craftsman 315.114832 Operator's Manual

DRIVING OR REMOVING SCREWS
See Figures 8 - 9.
 Place the direction of rotation selector in the correct
position for the operation.
 Hold the impact driver with one hand.
 Place the bit on the screw head and slowly depress the
switch trigger. Start the bit slowly for more control.
 As screw is driven, impacting will begin.
WARNING:
Do not drive a screw where there
is likely to be hidden wiring behind the surface.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator. If
you must drive a screw where hidden wire may
be present, always hold tool by insulated gripping
surfaces (handle) when performing the operation to
prevent a shock to the operator, as seen in figure 8.

OPERATION

14
RIGHT
WRONG
Fig. 8
Fig. 9