RIKA TARA Instruction Manual
Hide thumbs
Also See for TARA:
- Installation instructions manual (13 pages) ,
- Operating instructions manual (20 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for RIKA TARA
Summary of Contents for RIKA TARA
- Page 1 TARA Instruction Manual - 1 -...
- Page 2 - 2 -...
- Page 3 Fitting dimensions - 3 -...
- Page 4 Furnace door Furnace - 4 -...
- Page 5 Panel - 5 -...
-
Page 6: Table Of Contents
CONTENTS Drawing explanation ...............6 Technical Specification..............7 Packaging ..................7 Parts overview.................7 1. IMPORTANT INFORMATION General warning and safety instructions .........8 Before setting up .................8-9 2. BRIEF HEATING INFORMATION Suitable fuels ................10 Fuels quantities ................10 Maximum fuel quantity ..............10 Clean burning ................11 Burning wood ................11 3. -
Page 7: Technical Specification
TECHNICAL DATA The packaging of your new stove is environmentally (Fig. 1 - fitting dimensions) neutral to a great extent. This is a Design 1 fire and has a connection for The wood used in the packaging has not been surface fitting to a chimney that is equipped for other fires treated and may therefore be burnt in your stove. -
Page 8: Important Information
1. IMPORTANT INFORMATION Please read these instructions before installation and PRIOR TO SET-UP operation. Observe the national provisions and laws as well as the regulations and rules applicable locally. Floor bearing capacity: Ensure that the substructure is capable of bearing the weight of the stove prior to set-up. - Page 9 Stoves type 1 (BA 1): Observe the formation of flue gas (atmospheric inversion) and draughts when the weather is These may only be operated with the combustion unfavourable. chamber door closed. Infeed of too little combustion air can lead to The combustion chamber door may only be smoke in the rooms or to flue gas leaks.
-
Page 10: Brief Heating Information
2. BRIEF HEATING INFORMATION SUITABLE FUELS MAXIMUM FUEL QUANTITIES Wood: Your stove is generally suitable for burning dry firewood. You can also burn fuels such as wood briquettes. 2 logs of approx. 1 kg Wood briquettes (broken): Only use dry fuel (moisture content between 14 and 18 %). Burning waste of any kind, particularly plastic, damages 2 pieces of approx. -
Page 11: Clean Burning
2. THE RIGHT QUANTITY OF FIREWOOD AND Facing the challenges of our times means assuming FIREWOOD DIMENSIONS responsibility. Maintaining our natural world is now one of our most important tasks. Our products represent developments according to the state of the art. This is the - Too much firewood leads to overheating. -
Page 12: Installing The Fire Connecting The Fire
INLET (OPTIONAL) natural dimensions. 2. Chisel out (drill) the hole in the brickwork. - Connect to the intake nozzle a pipe Ø125 (see RIKA- assortment) and fix this with a pipe clamp (not included in 3. Brick in the wall liner. -
Page 13: Operation
4. OPERATION FIRE LIGHTING Only use paper for fire lighting. Wait until the softwood To reduce the emission of pollutants as far as possible, we chippings are burning well. ask you to observe the following instructions for the sake of the environment. Turn the regulator knob 90°... -
Page 14: Ash Drawer
THE STOVE COATING ONLY CURES COMPLETELY OPERATING THE RIDDLE GRATE ON INITIAL USE DUE TO THE HEAT - Do not touch the surface during heating. It is still The ash is moved from the combustion chamber to the ash soft. drawer by pushing the riddle grate handle (part 23) back and forth. -
Page 15: Fitting Options
5. FITTING OPTIONS FITTING THE PANEL / SOAP STONE LID (ILLUSTRATED: PANEL) Your fire will only be delivered with side panels due to high weight of the soap stone panels. The soap stone lids will be packed separately and must be fitted after the fire has been set up. -
Page 16: Maintenance And Cleaning
6. MAINTENANCE AND CLEANING GENERAL MAINTENANCE CONVECTION AIR OPENINGS Your stove TARA has been designed by our development Suction off any dust deposits from the convection air team for minimum maintenance and very long service life. openings at regular intervals. -
Page 17: Problem Solving
7. PROBLEM SOLVING WHAT TO DO IF…? Problem Reason Solution Always: Every glass plate must be cleaned 1. Ceramic glass soots over too quickly from time to time (depending on use) with a glass cleaner Clarification with chimney sweep (possible Poor air movement raising of chimney) Regulate... -
Page 18: Fitting
8. FITTING FITTING THE SOAP STONE LID At least 2 people are required to fit the fire due to the high weight of the fire and the soaps. 4. Place 2 of the total of 4 bolts supplied in both drill holes on the first stone that are located in the fire ash drawer. -
Page 19: Optional Rear Connection
OPTION REAR CONNECTION ➧ The side panels must be secured before starting work with the connection option. ➧ Cut out the pre-stamped round section in the rear wall (Part 46) [metal cutting saw blade]. ➧ Replace the flue gas nozzle and the cooking lid with one another (Part 47,48) The procedure for fitting the soap stone lid for the rear connection (Item 40) is identical with the fitting of the soap... -
Page 20: Warranty
RIKA dealer in writing using the invoice and stating the manufacturer’s instructions for operation of the unit or any purchase date, model name, serial number and reason for damage that is caused by action such as overheating, use complaint. - Page 21 - 21 -...
- Page 22 - 22 -...
- Page 23 G U A R A N T E E / G A R A N T I E Purchase day/Date d’achat: Trader stamp/Cachet du revendeur: Model designation/Nom du modéle: Numbers of the vehicle identification plate on the furnace back: Numméros de la plaque signalétique á l’arriére du poêle: Attached by/Raccordé...
- Page 24 G U A R A N T E E / G A R A N T I E Stamp Customer/Client: Marque To/A: - 24 -...
Need help?
Do you have a question about the TARA and is the answer not in the manual?
Questions and answers