Parts Of The Front Cover; Lcd; Touch Panel; Floppy Disk Drive - Husqvarna Viking Designer I Service Manual

Parts of the front cover

LCD

Dismounting
1. Dismont the rear covers
2. Dismount the front cover.
3. Remove the LCD frame from the front cover by dismouning the 4 screws (A).
4. Remove the LCD light cable (E)
5. Remove the LCD by dismounting the 4 screws (C).
Mounting
Mount in reverse order.
Note! The black sealing should be on the the LCD.

Touch Panel

Can be removed after dismounting the LCD frame.

Floppy disk drive

Dismounting
1. Dismont the rear covers
2. Dismount the front cover.
3. Remove the LCD frame from the front cover by dismounting the 4 screws (A),
4. Remove the transformer box by dismounting the screw (B).
5. Remove the Floppy disk drive by dismount the 3 screws (D).
6. Remove the cable from the floppy disk drive.
Mounting
Mount in reverse order.
NOTE! When mounting the cable the contact area of the cable should be facing the floopy
disk drive
14
Covers
104 72 47-26