Table of Contents
Advertisement
Power button
USB port
Connector
Reset
Micro SD card slot Accepts micro SD card (up to 32G).
Volume +/- button Press to increase/decrease the volume.
Buttons
Power button
Power the tablet On
Press and hold the Power
Power the tablet Off
Press and hold the Power
message displays, then tap it and the tablet will be powered off.
Sleep Mode
Briefly press the Power button to put the tablet in sleep mode.
If you don't operate for some time, the tablet will enter sleep
mode automatically.
Tip: You can go to Settings -> Device -> Display -> Sleep to
set the screen timeout.
Wake the tablet from Sleep Mode
Press the Power button to wake the tablet from sleep mode.
Volume +/- button
Press the Volume +/- button to increase or decrease the
volume.
Tip: You can go to Settings -> Device -> Sound & notification
-> Sound general settings to adjust volume settings.
Press to enter standby/wake up mode,
press and hold to switch On/Off the unit.
Connect to a USB storage device or a
mouse or a wire keyboard.
Use to connect the keyboard.
Press to reset the tablet (then press and
hold the Power
to turn on the unit).
button until the RCA logo appears.
button until the"
EN - 8
button for 4~5 seconds
Power off"
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 10 Viking Pro RCT6303W87 DK and is the answer not in the manual?
Questions and answers
RCA VIKING 10 TABLET GOOGLE LOCKED HOW DO I OPEN BIOS ???
Screen keeps flipping to unwanted orientation even when auto screen is turned off. How do you keep it from automatically switching display orientation.
holding the power dose nothing
The RCA 10 Viking Pro RCT6303W87DK may not power on when the power button is pressed due to a software issue causing it to be stuck on the "Viking Pro" screen. Possible solutions include:
1. Holding the volume up and power buttons together until a menu appears, then selecting "Power Off" or "Factory Reset" using the volume and power buttons.
2. Using a paperclip to press and hold the reset button for 5–10 seconds to restart the device.
If these steps do not work, the issue may be related to hardware or battery problems.
This answer is automatically generated