Table of Contents
Advertisement
Troubleshooting
If your television does not operate normally or does not turn on, please check the following
troubleshooting questions. Remember to also check the other connected electronic devices, such as DVDs
or Blu-ray players to pinpoint any problem. If the television still fails to operate normally, please contact
technical support (refer to Warranty page).
SYMPTOM
Dead. No LED lit
Dead. No LED lit red
Blue screen
Noisy, snowy, ghosting
picture (TV)
No sound
POSSIBLE CAUSE
No power to the TV.
Set in standby mode.
No signal.
Incorrect source selected.
Poor antenna signal.
S
o
u
n
d
"
M
u
e t
. "
Volume set too low.
External leads not connected
"if used".
REMEDY
Check all connections to the TV's AC socket.
Press either the Power button or the Standby button
on the remote control.
Press SOURCE button to select the correct source
If using an indoor antenna, try adjusting the antenna
postion. Check antenna connections
T
u
n r
s
o
u
n
d
"
M
u
e t
Check volume settings.
Check that all external leads are connected properly.
0
2
"
O
F
. F
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the ELEFW408 and is the answer not in the manual?
Questions and answers
What is the Pb and Pr stands for
How to connect a universal remote
The universal remote control for Element TV model ELEFW408 does not require programming or pairing. To connect it, simply insert two new AAA batteries (not included), and it will work automatically with the TV.
This answer is automatically generated
Cómo reproducir video en un usb
The available information only mentions playing pictures from a USB on the Element ELEFW408 TV. There is no mention of video playback support.
This answer is automatically generated