Ponmgs - Power On Message; Roger - Roger Beep; Reset - Restore Defaults; Roger/Reset - Baofeng UV-5R Documentation

38 PONMGS - Power On Message

PONMSG
Values
OFF
38 PONMGS - Power On Message
When enabled it displays a 2 line message on the display. Message can only be set via
computer.
Key
0
1

39 ROGER - Roger Beep

Transmits an audible tone after you release the PTT.
Key
1
0

40 RESET - Restore defaults

Resets the radio to factory defaults, with some exceptions.
Key
0
1
* RESET>ALL resets everything with the exception of:
The Power On Message
The VIP software band limits
On some firmware it may reset language to Chinese
Appendix B. Menu definitions
Notes
Values Notes
Flash entire LCD
FULL
Displays a 2 line
MSG
welcome message
Values Notes
ON
OFF
Values Notes
VFO VFO settings only
Total reset*
ALL
Baofeng UV-5R
Default value
Default value
MSG
Default value
OFF
Default value
ALL
Resets all menus to firmware default,
sets the [A] and [B] VFO frequencies to
factory default, erases all channels and
programs channel 0 to 136.025 MHz
and channel 127 to 470.625 MHz.
59
FULL
Resets all menus to
frmware default and
sets the [A] and [B]
VFO frequencies to
firmware default.