Sharp PZ-43HV2 Service Manual page 14

PZ-43HV2, PZ-43HV2E
PZ-43HV2U
Y DRIVE, SCAN (A), (B) Assy
1
Remove the three screws.
Front Case Assy 43 (P)
2
Loosen a rivet.
3
Remove the Lead Cover (P).
4
Pull out a Flexible Cable.
2
Lead Cover (P)
Rivet
Turn it not to press the rivet.
(Because when the rivet presses,
fit in once again.)
5
Remove bottom by the fulcrum at the top of Front Case
Assy 43 (P).
6
Remove the Front Case Assy 43 (P).
6
It is the structure that a hook of
Front Case Assy 43 (P) was put between
with Rear Case and aluminum materials.
5
1
×3
4 4
3
Lead Cover (P)
It is easy to remove when pull out
the Lead Cover (P) with the rivet
before completely removing the rivet.
Front Case Assy 43 (P)
Rear Case
Aluminum
Materials
7 Remove the Rear Case (P). (Screws × 19)
8
Remove the Y DRIVE Assy.
(Connector, PCB Spacer × 3, Screws × 8)
9 Remove the Front Chassis V. (Screws × 5)
10
Remove the Scan IC Spring (43L) and (43R).
(Screws × 1)
8
×2
9
8
8
9
Scan IC Spring (43L)
11
Reverse the SCAN (A) and SCAN (B) Assemblies.
12
When it is necessary, exchange the ROM.
14
Y DRIVE Assy
8
×2
8
10
9
8
8
9
Scan IC Spring (43R)
9
SCAN (B) Assy
11
11
ROM
SCAN (A) Assy
×6