Caution Label - Epson TM-P20 User Manual

English
❏ Do not use this product in an environment where flammable gas or explosive gas may exist. Do
not use aerosol sprayers containing flammable gas inside or around this product. Doing so may
cause fire.
❏ Do not connect cables in ways other than those mentioned in this manual. Doing so may cause
fire. It may also damage other devices.
❏ Do not touch the areas inside the product other than those mentioned in this manual. Doing so
may cause electric shock or burns.
!
CAUTION:
❏ Do not allow anyone to stand or place heavy objects on top of this product. Equipment may fall or
collapse, causing breakage and possible injury.
❏ Install the printer, cables and optional products in the proper direction according to the proper
procedures. Failure to install correctly may cause fire or injury. Follow the instructions in this manual to
install them properly.
❏ Be sure to disconnect all the cables from the product before you move it. Otherwise the cables could be
damaged, potentially resulting in electric shock or fire.
Cautions on the Power Supply
Read the manual supplied with the AC adapter carefully before using the accessory AC adapter.
This product uses a listed power unit marked "Class 2" or "LPS," with the output voltage of maximum 1.5 A
at DC 24 V.
With the optional AC adapter (Epson AC Adapter, C), the output voltage is maximum 1.5 A at DC 24 V,
and the input voltage is AC 100 V to 240 V.
!
WARNING:
Be sure to use the specified AC adapter (Epson AC adapter C, model: M235A or M235B). Using any
other power supply could cause faults, fire or electric shock.

Caution Label

The caution label on the product indicates the following precaution.
K
!
CAUTION:
Do not touch the thermal head during printing or immediately after printing. After printing, the thermal head
can be very hot.
!
CAUTION:
Take care not to injure your fingers on the manual cutter.
5