Harbor Breeze BUILDER'S SERIES 40698 Instruction Manual
  1. Manuals
  2. Brands
  3. Harbor Breeze Manuals
  4. Fan
  5. BUILDER'S SERIES 40698
  6. Instruction manual

Harbor Breeze BUILDER'S SERIES 40698 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Harbor Breeze® is a registered trademark
of LF, LLC. All Rights Reserved.
ATTACH YOUR RECEIPT HERE
Serial Number _________________________
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m.,
EST, Friday.
EB14180
BUILDER'S SERIES
Purchase Date _________________________
1
ITEM #0593748

CEILING FAN

MODEL #40698
Español p. 20
Lowes.com/harborbreeze

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BUILDER'S SERIES 40698 and is the answer not in the manual?

Questions and answers

Related Manuals for Harbor Breeze BUILDER'S SERIES 40698

Summary of Contents for Harbor Breeze BUILDER'S SERIES 40698

  • Page 1: Ceiling Fan

    ITEM #0593748 BUILDER’S SERIES CEILING FAN MODEL #40698 Español p. 20 Harbor Breeze® is a registered trademark of LF, LLC. All Rights Reserved. ATTACH YOUR RECEIPT HERE Serial Number _________________________ Purchase Date _________________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Package Contents ..............3 Hardware Contents .

  • Page 3: Package Contents

    PACKAGE CONTENTS PART DESCRIPTION QUANTITY Downrod Downrod Pin (preassembled to the Downrod (A)) Downrod Clip (preassembled to the Downrod (A)) Canopy Mounting Bracket (preassembled to the Canopy (D)) Canopy Cover (preassembled to the Canopy (D)) Motor Assembly Switch Housing (preassembled to the Motor Assembly (G)) Blade Arm Blade Blade Balance Kit...

  • Page 4: Hardware Contents

    HARDWARE CONTENTS (shown actual size) Wire Connector Pull Chain Blade Screw Blade Washer Qty. 3 Extension Qty. 5 Qty. 5 + 1 extra Qty. 1 + 1 extra + 1 extra Lowes.com/harborbreeze...

  • Page 5: Safety Information

    SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • Before you begin installing the fan, disconnect the power by removing fuses or turning off the circuit breakers. • Make sure all electrical connections comply with local codes, ordinances, the National Electrical Code and ANSI/NFPA 70-199. Hire a qualified electrician or consult a do-it-yourself wiring handbook if you are unfamiliar with installing electrical wiring.

  • Page 6: Preparation

    SAFETY INFORMATION CAUTION: Read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams. CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present. CAUTION: Carefully check all screws, bolts and nuts on the fan motor assembly to ensure that they are secured.

  • Page 7: Initial Installation

    INITIAL INSTALLATION 1. Turn off the circuit breakers and the wall switch to the fan supply line leads. DANGER: Failure to disconnect the power supply prior to installation may result in serious injury or death. 2. Determine the mounting method to use. Helpful Hint: Standard mounting is best suited for ceilings 8 ft.
  • Page 8 INITIAL INSTALLATION 4. Loosen all four mounting bracket screws (N), then completely remove the two mounting bracket screws (N) from the round holes of canopy (D). Set aside for later use. Detach mounting bracket (E) from canopy (D). 5. Attach mounting bracket (E) to outlet box (not Standard and included) using screws and washers provided with the Closemount...

  • Page 9: Standard Or Angle Mounting Instructions

    STANDARD OR ANGLE MOUNTING INSTRUCTIONS 1. Remove the downrod pin (B) and downrod clip (C) from the downrod (A). Then partially loosen the set screws (O) in the yoke at the top of the motor assembly (G). Yoke 2. Insert the downrod (A) through the canopy (D). Thread the wires from the motor assembly (G) through the downrod (A).
  • Page 10 STANDARD OR ANGLE MOUNTING INSTRUCTIONS 4. Depending on the length of downrod you use, you may need to cut the lead wires back to simplify the wiring. If you decide to cut back the lead wires, it is suggested you do so in the following manner: Take the lead wires and make sure you have pulled them all the way through the top of the downrod.

  • Page 11: Closemount Instructions

    CLOSEMOUNT INSTRUCTIONS 1. Remove the canopy cover (F) from the bottom of the canopy (D). Note: The downrod (A) and canopy cover (F) are not used in this type of installation. 2. Remove three Phillips-head closemount screws (M) from the top of the motor assembly (G). Align the canopy (D) with the holes in the top of the motor assembly (G), then re-install the Phillips-head closemount screws (M) to secure the canopy (D) to...

  • Page 12: Wiring

    WIRING WARNING: To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your house wire is larger than 12 gauges and/or there is more than one house wire to connect to the two fan lead wires, consult an electrician for the proper size wire connectors to use.

  • Page 13: Final Installation

    FINAL INSTALLATION Note: Closemount installation will not use the downrod (A) or canopy cover (F). 1. Align the canopy (D) over the loose mounting bracket screws (N) preassembled on mounting bracket (E). Place the keyholes of the canopy (D) onto the mounting bracket screws (N) and rotate the canopy (D) clockwise.
  • Page 14 FINAL INSTALLATION 3. Align the studs of the blade arm (I) with their corresponding holes in the blade (J). Then, insert the blade screw (CC) with blade washer (DD) where shown to attach studs of blade arm (I) to blade (J). Tighten the blade screw (CC).

  • Page 15: Operating Instructions

    OPERATING INSTRUCTIONS 1. The fan pull chain has four positions to control fan speed. One pull is HIGH, two is MEDIUM, three is LOW and four turns the fan OFF. Fan Pull Chain 2. Use the fan reverse switch, located on the switch housing (H) to optimize your fan for seasonal performance.

  • Page 16: Care And Maintenance

    CARE AND MAINTENANCE At least twice each year, lower the canopy to check the downrod assembly, and then tighten all screws on the fan. Clean the motor housing with only a soft brush or lint-free cloth to avoid scratching the finish. Clean the blades with a lint-free cloth. You may occasionally apply a light coat of furniture polish to wood blades for added protection.
  • Page 17 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION 1. The blades and/or blade are 1. Check and tighten all screws that loose. hold the fan blades to the blade arms and the blade arms to the motor. 2. The blades are unbalanced. 2.

  • Page 18: Limited Lifetime Warranty

    LIFETIME LIMITED WARRANTY The manufacturer warrants this fan to be free from defects in workmanship and materials present at time of shipment from the factory for a lifetime from the date of purchase by the original purchaser. The retailer also warrants that all other fan parts, excluding any glass or plastic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.

  • Page 19: Replacement Parts List

    Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday. PART DESCRIPTION PART # Downrod 0593748-A Canopy 0593748-D Mounting Bracket 0593748-E Canopy Cover 0593748-F Blade Arm 0593748-I Blade 0593748-J Hardware Kit 0593748-HW Printed in China Harbor Breeze® is a registered trademark of LF, LLC. All Rights Reserved. Lowes.com/harborbreeze 9088 • 060514...

Table of Contents