Checking the base station's MAC address
Depending on the network configuration, you may require the MAC address of the base station,
e.g. in order to enter it in the router's access control list.
Check the MAC address on the handset:
MAC address is displayed
Return to idle status:
Changing the system PIN
Secure the telephone's system settings with a system PIN. You have to enter the system PIN
when you register or de-register a handset, change local network settings, perform a firmware
update or reset the phone to default settings.
For the purpose of remotely operating the answer machine (
something other than 0000.
Change the telephone's 4-digit system PIN (default setting: 0000):
¤
. . . use
OK
. . . use
new system PIN
Resetting system PIN
Resetting the base station to the original PIN 0000:
¤
Unplug the network cable from the base station
key on the base station
station
Press and hold the key for at least 5 secs . . . the base station is reset and the system
PIN is set to 0000
All handsets are de-registered and must be re-registered. All settings are returned to
default settings.
Restarting the base station
¤
. . . use
station is restarted, the connection to the handset is briefly interrupted
Back
to select
Settings
to enter the current PIN (if other than 0000)
Save
At the same time reconnect the network cable to the base
to select
Settings
p. 48) the system PIN must be
OK
System
OK
Press and hold the Registration/Paging
OK
Base Restart
System
. . . the
OK
System PIN
. . . use
to enter
OK . . . the base
97
Need help?
Do you have a question about the SL450A GO and is the answer not in the manual?
Questions and answers