Max SuperSider CN565S2 Operating And Maintenance Manual page 11

HOW TO REMOVE USED PLASTIC SHEET COLLATION
As nails are driven the plastic sheet will feed out of the tool. When
two inches or more has been fed out it can be torn away by pull-
ing against the tear edge in the nose.
HOW TO REATTACH THE REMOVABLE "CONTACT NOSE".
WARNING
• ALWAYS disconnect air supply before reassem-
bling the contact nose.
1 Lock the Trigger and turn the depth adjust dial to the shal-
lowest position.
shallowest
position
2 Align the Contact Nose to the parts pointed by the arrows.
Contact Nose
3
lock
The tip of the rod must be seen like this after the reassembly is
done.
If not, try again from step 2.
11
Connection points
Contact Arm
With a Flathead screwdriver (see A) or manually (see
B),push the Contact Nose at the place indicated below until
it clicks.
A
Push
B
Press here with
your palm.
Contact Nose
Push here until it
clicks.
Flathead
screwdriver
Keep pressing it and
push the Contact
Nose until it clicks.
Press
Push