Table of Contents
Advertisement
Personal Protection
Trim Stump with
Saw
Clear Area
Work During
Daylight Hours
Operation
Locked Position
T-handle knob
Use approved protective clothing and approved protective equipment
when using the machine.
1) Always wear ANSI-approved and OSHA-compliant safety glasses
with side shields and a full-face shield.
2) The use of ear plugs or other hearing protection device is also
recommended for persons working within 15-20 feet of the running
grinder for longer than a few minutes. Hearing can be damaged from
prolonged, close-range exposure to the type of noise produced by this
grinder.
3) Wear long pants to protect legs from sparks, hot engine and flying
debris.
4) Never wear jewelry or loose-fitting clothing when starting or
operating the grinder or any mechanical device. Loose or dangling
apparel, jewelry or hair can become entangled in moving parts.
Cut or trim the stump preferably to ground level using a power saw.
Dig away the earth and remove any stones near the tree stump or roots that
may interfere with your work.
Only use the machine in daylight or in well-lit conditions. Never operate
the grinder after dark.
Handle
Hinge bracket
11
Unlocked Position
Rubber stop
Eyebolt
Advertisement
Table of Contents
