Table of Contents
Advertisement
6.3.1
Linking actuator and sensor
Fig. 17:
Linking actuator and sensor
1. On the working area select the sensor [1] that is to be linked with the actuator. Now a
selection list opens next to the icon of the weather station. Here all sensors of the weather
station are listed.
2. Select a sensor. The corresponding sensor is displayed in the list view.
3. Select the actuator [2] that is to be served by the sensor.
4. Press the arrow [3] at the bottom right to take over the entries.
A blue connecting line indicates the link between the two devices. The configuration is now
transmitted automatically to the devices. The transmission can, depending on the number of
affected devices, take a number of seconds. During the transmission a progress bar is
displayed around the devices affected.
NOTE
A sensor can be linked with several actuators.
A sensor can additionally be linked with scenes.
Technical Reference Manual 1473-1-8811
Commissioning
│24
Advertisement
Table of Contents
