Table of Contents
Advertisement
6.2.1
Setting the weather station
General sensor settings
Fig. 13: General sensor settings
Setting the brightness sensor
Fig. 14:
Setting the brightness sensor
For example:
The brightness sensor is connected to a blind actuator:
The brightness value is exceeded: the blind is moved down
■
(delay time: 5 minutes)
The brightness value drops below setpoint: the blind is moved up
■
(delay time: 15 minutes)
The hysteresis is generally set on 5000 lux.
Technical Reference Manual 1473-1-8811
Commissioning
[1] Changing the name
[2] Deleting the channel
[3] Definition of the sending interval
[4] Selection of the individual sensors
[1] Setting the lux value which is to activate the
brightness alarm
│21
Advertisement
Table of Contents
