Mitsubishi Electric APRICOT 340 Owner's Handbook Manual page 85

5. If necessary, place the heat sink into position on top of the new
processor. The vanes of the heat sink must be aligned with the
airflow from the fan in front of the processor. Refit the clip
that secures the heat sink to the processor.
6. You will need to adjust the processor speed selection
jumpers on the motherboard. See Appendix A, "Inside the
System Unit", for more information about locating and
adjusting motherboard jumper settings.
7. If necessary, replace the expansion cards you removed earlier.
8. Replace the system unit cover.
1
2
1 positioning guide
2 keyed corner
APRICOT 340 OWNER'S HANDBOOK
U p g r a d i n g
7/15