Remote Control - Mitsubishi Electric LT-40133 Owner's Manual

28
4. TV Operation and Features

Remote Control

1. POWER: Turns TV power on and off.
2. Slide Switch: Selects the A/V device to be con-
trolled by the remote control. Set the slide switch
to TV for operation of the TV and NetCommand-
controlled devices. Control of additional devices
requires programing (see Appendix D, "Program-
ming the Remote Control."
3. SLEEP: Sets the TV to turn off within 2 hours.
4. Digits/Letters: Press digits for channel numbers,
then press ENTER for faster tuning. Use numbers and
—
the CANCEL key to enter digital sub-channel numbers.
Use also for entering letters or names into menus.
To select letters when naming channels, repeatedly
press the associated number key. Press ENTER to set
the letter. Special characters are available with the 1
key (!, &, blank space) and 0 key (/ , * , -).
5. —/CANCEL (SUB-CHANNEL/CANCEL): Adds a separator
between main and sub-channel numbers for digital
channels. Clears Fav and some menu entries.
6. QV (QuickView™): Switches between the current
channel and the last channel viewed.
7. MUTE: Turns TV sound on and off.
8. SPLIT: Not used.
9. FAV (Favorites): Scans through memorized lists of
favorite channels. See "Setup Menu" in chapter 5,
"TV Menu Settings," for more information.
10. VOL / (Volume Up/Down): Changes sound
level.
11. CH/PAGE (Channel or Page Up/Down):
/
Scans up or down through memorized channels.
Pages up and down through screens when used
with the TV Guide Daily system (model LT-40134
only) or ChannelView™.
12. FORMAT: Changes the shape and size of the TV
picture.
13. INPUT: Displays the Input Selection menu from
which you can select an input source to view, such
as an antenna (ANT 1/ANT 2) or a connected device.
14. (Adjust Up/Down/Left/Right): Navigate
menus and change settings.
15. ENTER: Selects a channel number or menu item.
16. AUDIO: Selects individual audio settings to adjust.
17. VIDEO: Selects individual video settings to adjust.
18. GUIDE: Displays or closes ChannelView™ (or TV Guide
Daily - if enabled on model LT-40134) channel listing
for ANT 1 and ANT 2. Displays DVD disc or top
menu for a NetCommand-controlled DVD player.
Low-Battery Indicator
If you press a key and the POWER key blinks five times,
replace the remote control's batteries.
2
3
4
5
7 8 9
10 11
16
17
18
19
25 26
27 28
19. INFO: Displays an on-screen summary of the current
device in use and any broadcast information avail-
able, including current V-Chip ratings information.
See chapter 4, "TV Operation and Features."
20. MENU: Displays the main TV menu using the on-
screen menu system. When a sub-menu is open,
backs up one menu level.
21. EXIT: Closes TV on-screen menus/displays.
22. F1–F4
For devices under NetCommand control:
Perform NetCommand "Learning" to assign your
choice of functions to the F1–F4 keys.
For devices operating independently of
NetCommand: The F1–F4 keys work like the A,
B, C, D buttons on some cable boxes, satellite
receivers, and DVD players. Program the remote
control for your equipment and test the keys. See
Appendix D, "Programming the Remote Control."
23. (PAUSE): Freezes a broadcast TV picture. See
next page for use with recording devices (VCR,
DVD, DVR, etc.).
1
6
12
13
14
15
20
21
23
24
22