Sharp MD-DS55 Operation Manual page 62

MD-DS55
USING WITH THE ALKALINE BATTERY
(page 35)
1. Open the battery case supplied with the unit.
2. Insert the AA size battery [LR6] into the battery
case by matching it + and – terminals to the
diagram in the battery case, and then close the
battery case.
3. Align the protuberances on the battery case with
the indentations on the side of the unit.
4. Turn the fixing screw on the battery case toward
the word "LOCK", and then make sure that the
battery case does not move.
G When using this portable MD with an alkaline
battery, keep the rechargeable battery in the
main unit.
G Do not insert a rechargeable battery (such as
nickel-cadmium rechargeable battery) into the
battery case.
CHANGE THE INITIAL SETUP (pages 36 - 37)
1. Insert a MiniDisc.
2. Hold down the
for 2 seconds or more while in the stop mode.
After "SET UP" is displayed, "BEEP on" or
"BEEP off" will be displayed.
3. Slide the button to
you want to change.
BEEP on
62
button on the remote control
MODE
or to select a menu
autoPLAY autoPS LIGHTnor
4.Press the button to select the item you
MODE
want to change.
Beep sound
Auto play
Auto power save
Display on the remote control
Backlight on the remote control
Operation indicator
"LIGHTnor"
Display on the remote control
Backlight on the remote control Lit for approx. 10 seconds
Operation indicator
"LIGHTall"
Display on the remote control
Backlight on the remote control Lit.
Operation indicator
"LIGHToff"
Display on the remote control
Backlight on the remote control Lit for approx. 10 seconds
Operation indicator
(*) G The indicator blinks for several seconds when
an MD is inserted.
G While charging, the operation indicator remains lit
in "LIGHTnor.", "LIGHTall" and "LIGHToff" modes.
5. When the setup is completed, press the
OFF
ON
BEEP off
BEEP on
PL off
autoPLAY
PS off
autoPS
See table below
Indicated.
when operated.
Flashing.
Indicated.
Flashing.
Indicated for approx.
10 seconds when operated.
when operated.
Goes out.(*)
button.