Table of Contents
Advertisement
Adjusting text
The text on webpages may not automatically fit the size of your mobile display. This setting allows
you to wrap the text and adjust it so that it fits the screen of your mobile.
1
Wrap text
Select
2
Select
Yes
or No.
3
Scroll down as many times as necessary until
Reading certificates
Certificates are used for network security exchange (e.g. for secure payment transactions).
1
Select
Certificates
2
Select one of the Certificates available on the mobile and press OK. The selected certificate
is then displayed.
3
Press
Cancel
Sending terminal info
To allow or forbid the automatic sending of mobile-related information (linked to the i-mode) to
the server.
1
Send terminal info
Select
2
Yes
or No.
Select
3
Scroll down as many times as necessary until
Setting homepage
To define the homepage address. This allows you to access your favourite webpage via the Go
to webpage menu (see "i-mode applications", page 50).
1
Set homepage
Select
2
Select
Valid
and enter the http:// address.
3
Scroll down as many times as necessary until
Checking the settings
You can check the status of all your settings via this menu.
1
Check settings
Select
Going back
1
Back
Select
or press
Getting back to the main menu
Whilst adjusting or modifying one of the above features, selecting
to the Settings sub-menu and selecting i-mode allows you to go back to the i-mode main menu.
Whilst in the Settings menu, select Cancel, Back or
Mail system
Your mobile allows you to send and receive e-mails and MMS.
However the availability of these features is operator dependent. Please read
the following instructions to configure your mail system and use the Mail menu.
You can access the i-mode Mail sub-menu in 2 ways:
1
or:
1
2
1. The contents of the Mail menu may vary according to your service provider.
2. Pressing on the left arrow key while navigating the Mail menu leads to the i-mode menu.
3. The maximum e-mail size (on e-mail sending or receiving) is 100Kb (attachment included).t of the message text.
or press
.
or press
.
(left soft key) to return to the certificates list.
or press
or press
.
or press
to view the contents of each parameter.
to go back to the i-mode menu.
From the standby display select
From the Standby display select
Mail
Select
or press
is highlighted and press
.
is highlighted and press
is highlighted and press
to return to the i-mode main menu.
.
Mail
.
i-mode
.
i-mode
52-
OK
to validate.
OK
to validate.
OK
to validate.
allows you to go back
Advertisement
Table of Contents
